RABBITMQCTL(8)

NAME
rabbitmqctl - tool for managing RabbitMQ nodes

SYNOPSIS
rabbitmqctl [-q] [-s] [-l] [-n node] [-t timeout] command [command_options]

DESCRIPTION
RabbitMQ is an open-source multi-protocol messaging broker.

rabbitmqctl is the main command line tool for managing a RabbitMQ server node, together with rabbitmq-diagnostics , rabbitmq-upgrade , and others.

It performs all actions by connecting to the target RabbitMQ node on a dedicated CLI tool communication port and authenticating using a shared secret (known as the cookie file).

Diagnostic information is displayed if the connection failed, the target node was not running, or rabbitmqctl could not authenticate to the target node successfully. To learn more, see the RabbitMQ CLI Tools guide: https://www.rabbitmq.com/docs/cli

OPTIONS

-n node
    The default node is "rabbit@target-hostname", where target-hostname is the local host. On a host named "myserver.example.com", the node name will usually be "rabbit@myserver" (unless RABBITMQ_NODENAME has been overridden, in which case you'll need to use

--longnames
    ). The output of "hostname -s" is usually the correct hostname to use after the "@" sign. See rabbitmq-server(8) for details of configuring a RabbitMQ node.

-q, --quiet
    Quiet output mode is selected. Informational messages are reduced when quiet mode is in effect.

-s, --silent
    Silent output mode is selected. Informational messages are reduced and table headers are suppressed when silent mode is in effect.

--no-table-headers
    Do not output headers for tabular data.

--dry-run
    Do not run the command. Only print informational messages.

-t timeout, --timeout timeout
    Operation timeout in seconds. Not all commands support timeouts. The default is infinity.

-l, --longnames
    Must be specified when the cluster is configured to use long (FQDN) node names. To learn more, see the RabbitMQ Clustering guide: https://www.rabbitmq.com/docs/clustering

--erlang-cookie cookie
    Shared secret to use to authenticate to the target node. Prefer using a local file or the RABBITMQ_ERLANG_COOKIE environment variable instead of specifying this option on the command line. To learn more, see the RabbitMQ CLI Tools guide: https://www.rabbitmq.com/docs/cli

COMMANDS

help [-l] [command_name]

    Prints usage for all available commands.

    -l, --list-commands
        List command usages only, without parameter explanation.

    command_name
        Prints usage for the specified command.

version

    Displays CLI tools version

  Nodes

await_startup

    Waits for the RabbitMQ application to start on the target node

    For example, to wait for the RabbitMQ application to start:

        rabbitmqctl await_startup

reset

    Returns a RabbitMQ node to its virgin state.

    Removes the node from any cluster it belongs to, removes all data from the management database, such as configured users and vhosts, and deletes all persistent messages.

    For reset and force_reset to succeed the RabbitMQ application must have been stopped, e.g. with stop_app.

    For example, to reset the RabbitMQ node:

        rabbitmqctl reset

rotate_logs

    Instructs the RabbitMQ node to perform internal log rotation.

    Log rotation is performed according to the logging settings specified in the configuration file. The rotation operation is asynchronous, there is no guarantee that it will complete before this command returns.

    Note that there is no need to call this command in case of external log rotation (e.g. from logrotate(8)).

    For example, to initial log rotation:

        rabbitmqctl rotate_logs

shutdown

    Shuts down the node, both RabbitMQ and its runtime. The command is blocking and will return after the runtime process exits. If RabbitMQ fails to stop, it will return a non-zero exit code. This command infers the OS PID of the target node and therefore can only be used to shut down nodes running on the same host (or broadly speaking, in the same operating system, e.g. in the same VM or container)

    Unlike the stop command, the shutdown command:

    •   does not require a pid_file to wait for the runtime process to exit

    •   returns a non-zero exit code if the RabbitMQ node is not running

    For example, this will shut down a local RabbitMQ node running with the default node name:

        rabbitmqctl shutdown

start_app

    Starts the RabbitMQ application.

    This command is typically run after performing other management actions that require the RabbitMQ application to be stopped, e.g. reset.

    For example, to instruct the RabbitMQ node to start the RabbitMQ application:

        rabbitmqctl start_app

stop [pid_file]

    Stops the Erlang node on which RabbitMQ is running. To restart the node follow the instructions for "Running the Server" in the installation guide: https://www.rabbitmq.com/docs/download.

    If a pid_file is specified, also waits for the process specified there to terminate. See the description of the wait command for details on this file.

    For example, to instruct the RabbitMQ node to terminate:

        rabbitmqctl stop

stop_app

    Stops the RabbitMQ application, leaving the runtime (Erlang VM) running.

    This command is typically run before performing other management actions that require the RabbitMQ application to be stopped, e.g. reset.

    For example, to instruct the RabbitMQ node to stop the RabbitMQ application:

        rabbitmqctl stop_app

wait pid_file, wait --pid pid

    Waits for the RabbitMQ application to start.

    This command will wait for the RabbitMQ application to start at the node. It will wait for the pid file to be created if pidfile is specified, then for a process with a pid specified in the pid file or the --pid argument, and then for the RabbitMQ application to start in that process. It will fail if the process terminates without starting the RabbitMQ application.

    If the specified pidfile is not created or the erlang node is not started within --timeout the command will fail. The default timeout is 10 seconds.

    A suitable pid file is created by the rabbitmq-server(8) script. By default, this is located in the Mnesia directory. Modify the RABBITMQ_PID_FILE environment variable to change the location.

    For example, this command will return when the RabbitMQ node has started up:

        rabbitmqctl wait /var/run/rabbitmq/pid

  Cluster management

await_online_nodes count

    Waits for count nodes to join the cluster

    For example, to wait for two RabbitMQ nodes to start:

        rabbitmqctl await_online_nodes 2

cluster_status

    Displays all the nodes in the cluster grouped by node type, together with the currently running nodes.

    For example, this command displays the nodes in the cluster:

        rabbitmqctl cluster_status

force_boot

    Ensures that the node will start next time, even if it was not the last to shut down.

    Normally when you shut down a RabbitMQ cluster altogether, the first node you restart should be the last one to go down, since it may have seen things happen that other nodes did not. But sometimes that's not possible: for instance, if the entire cluster loses power then all nodes may think they were not the last to shut down.

    In such a case you can invoke force_boot while the node is down. This will tell the node to unconditionally start the next time you ask it. Any changes to the cluster after this node shut down will be lost.

    If the last node to go down is permanently lost then you should use forget_cluster_node --offline instead of this command, as it will ensure that mirrored queues whose leader replica was on the lost node get promoted.

    For example, this will force the node not to wait for other nodes the next time it is started:

        rabbitmqctl force_boot

force_reset (deprecated)

    Forcefully returns a RabbitMQ node to its virgin state.

    The force_reset command differs from reset in that it resets the node unconditionally, regardless of the current management database state and cluster configuration. It should only be used as a last resort if the database or cluster configuration has been corrupted.

    The force_reset command is deprecated. It remains available when the Mnesia metadata store is used. It is unsupported with the Khepri metadata store.

    For reset and force_reset to succeed the RabbitMQ application must have been stopped, e.g. with stop_app.

    For example, to reset the RabbitMQ node:

        rabbitmqctl force_reset

forget_cluster_node [--offline]

    --offline
        Enables node removal from an offline node. This is only useful in the situation where all the nodes are offline and the last node to go down cannot be brought online, thus preventing the whole cluster from starting. It should not be used in any other circumstances since it can lead to inconsistencies.

    Removes a cluster node remotely. The node that is being removed must be offline, while the node we are removing from must be online, except when using the --offline flag.

    When using the --offline flag , rabbitmqctl will not attempt to connect to a node as normal; instead it will temporarily become the node in order to make the change. This is useful if the node cannot be started normally. In this case, the node will become the canonical source for cluster metadata (e.g. which queues exist), even if it was not before. Therefore you should use this command on the latest node to shut down if at all possible.

    For example, this command will remove the node "rabbit@stringer" from the node "hare@mcnulty":

        rabbitmqctl -n hare@mcnulty forget_cluster_node rabbit@stringer

join_cluster seed-node

    seed-node
        Existing cluster member (seed node) to cluster with.

    Instructs the node to become a member of the cluster that the specified node is in. Before clustering, the node is reset, so be careful when using this command. For this command to succeed the RabbitMQ application must have been stopped, e.g. with stop_app.

    After executing the join_cluster command, whenever the RabbitMQ application is started on the current node it will attempt to connect to the nodes that were in the cluster when the node went down.

    To leave a cluster, reset the node. You can also remove nodes remotely with the forget_cluster_node command.

    To learn more, see the RabbitMQ Clustering guide: https://www.rabbitmq.com/docs/clustering.

  User Management
Note that all user management commands rabbitmqctl only can manage users in the internal RabbitMQ database. Users from any alternative authentication backends such as LDAP cannot be inspected or managed with those commands. rabbitmqctl.

add_user username password

    username
        The name of the user to create.

    password
        The password the created user will use to log in to the broker.

    For example, this command instructs the RabbitMQ broker to create a (non-administrative) user named "janeway" with (initial) password "changeit":

        rabbitmqctl add_user janeway changeit

authenticate_user username password

    username
        The name of the user.

    password
        The password of the user.

    For example, this command instructs the RabbitMQ broker to authenticate the user named "janeway" with the password "verifyit":

        rabbitmqctl authenticate_user janeway verifyit

change_password username newpassword

    username
        The name of the user whose password is to be changed.

    newpassword
        The new password for the user.

    For example, this command instructs the RabbitMQ broker to change the password for the user named "janeway" to "newpass":

        rabbitmqctl change_password janeway newpass

clear_password username

    username
        The name of the user whose password is to be cleared.

    For example, this command instructs the RabbitMQ broker to clear the password for the user named "janeway":

        rabbitmqctl clear_password janeway

    This user now cannot log in with a password (but may be able to through e.g. SASL EXTERNAL if configured).

hash_password plaintext

    plaintext
        The plaintext password to hash

    Hashes a plaintext password according to the currently configured password hashing algorithm

delete_user username

    username
        The name of the user to delete.

    For example, this command instructs the RabbitMQ broker to delete the user named "janeway":

        rabbitmqctl delete_user janeway

list_users

    Lists users. Each result row will contain the user name followed by a list of the tags set for that user.

    For example, this command instructs the RabbitMQ broker to list all users:

        rabbitmqctl list_users

set_user_tags username [tag ...]

    username
        The name of the user whose tags are to be set.

    tag Zero, one or more tags to set. Any existing tags will be removed.

    For example, this command instructs the RabbitMQ broker to ensure the user named "janeway" is an administrator:

        rabbitmqctl set_user_tags janeway administrator

    This has no effect when the user authenticates using a messaging protocol, but can be used to permit the user to manage users, virtual hosts and permissions when the user logs in via some other means (for example with the management plugin).

    This command instructs the RabbitMQ broker to remove any tags from the user named "janeway":

        rabbitmqctl set_user_tags janeway

  Access control

clear_permissions [-p vhost] username

    vhost
        The name of the virtual host to which to deny the user access, defaulting to "/".

    username
        The name of the user to deny access to the specified virtual host.

    Sets user permissions.

    For example, this command instructs the RabbitMQ broker to deny the user named "janeway" access to the virtual host called "my-vhost":

        rabbitmqctl clear_permissions -p my-vhost janeway

clear_topic_permissions [-p vhost] username [exchange]

    vhost
        The name of the virtual host to which to clear the topic permissions, defaulting to "/".

    username
        The name of the user to clear topic permissions to the specified virtual host.

    exchange
        The name of the topic exchange to clear topic permissions, defaulting to all the topic exchanges the given user has topic permissions for.

    Clear user topic permissions.

    For example, this command instructs the RabbitMQ broker to remove topic permissions for the user named "janeway" for the topic exchange "amq.topic" in the virtual host called "my-vhost":

        rabbitmqctl clear_topic_permissions -p my-vhost janeway amq.topic

list_permissions [-p vhost]

    vhost
        The name of the virtual host for which to list the users that have been granted access to it, and their permissions. Defaults to "/".

    Lists permissions in a virtual host.

    For example, this command instructs the RabbitMQ broker to list all the users who have been granted access to the virtual host called "my-vhost", and the permissions they have for operations on resources in that virtual host. Note that an empty string means no permissions are granted:

        rabbitmqctl list_permissions -p my-vhost

list_topic_permissions [-p vhost]

    vhost
        The name of the virtual host for which to list the user's topic permissions. Defaults to "/".

    Lists topic permissions in a virtual host.

    For example, this command instructs the RabbitMQ broker to list all the users who have been granted topic permissions in the virtual host called "my-vhost:"

        rabbitmqctl list_topic_permissions -p my-vhost

list_user_permissions username

    username
        The name of the user for which to list the permissions.

    Lists user permissions.

    For example, this command instructs the RabbitMQ broker to list all the virtual hosts to which the user named "janeway" has been granted access, and the permissions the user has for operations on resources in these virtual hosts:

        rabbitmqctl list_user_permissions janeway

list_user_topic_permissions username

    username
        The name of the user for which to list the topic permissions.

    Lists user topic permissions.

    For example, this command instructs the RabbitMQ broker to list all the virtual hosts to which the user named "janeway" has been granted access, and the topic permissions the user has in these virtual hosts:

        rabbitmqctl list_user_topic_permissions janeway

list_vhosts [vhostinfoitem ...]

    Lists virtual hosts.

    The vhostinfoitem parameter is used to indicate which virtual host information items to include in the results. The column order in the results will match the order of the parameters. vhostinfoitem can take any value from the list that follows:

    name
        The name of the virtual host with non-ASCII characters escaped as in C.

    tracing
        Whether tracing is enabled for this virtual host.

    default_queue_type
        Default queue type for this vhost.

    description
        Virtual host description.

    tags
        Virtual host tags.

    cluster_state
        Virtual host state: nodedown, running, stopped.

    If no vhostinfoitem s are specified then the vhost name is displayed.

    For example, this command instructs the RabbitMQ broker to list all virtual hosts:

        rabbitmqctl list_vhosts name tracing

set_permissions [-p vhost] user conf write read

    vhost
        The name of the virtual host to which to grant the user access, defaulting to "/".

    user
        The name of the user to grant access to the specified virtual host.

    conf
        A regular expression matching resource names for which the user is granted configure permissions.

    write
        A regular expression matching resource names for which the user is granted write permissions.

    read
        A regular expression matching resource names for which the user is granted read permissions.

    Sets user permissions.

    For example, this command instructs the RabbitMQ broker to grant the user named "janeway" access to the virtual host called "my-vhost", with configured permissions on all resources whose names start with "janeway-", and write and read permissions on all resources:

        rabbitmqctl set_permissions -p my-vhost janeway "^janeway-.*" ".*" ".*"

set_permissions_globally username conf write read

    username
        The name of the user to grant access to the specified virtual host.

    conf
        A regular expression matching resource names for which the user is granted configure permissions.

    write
        A regular expression matching resource names for which the user is granted write permissions.

    read
        A regular expression matching resource names for which the user is granted read permissions.

    Sets user permissions in all vhosts.

    For example, this command instructs the RabbitMQ broker to grant the user named "janeway" access to all virtual hosts with configure permissions on all resources whose names starts with "janeway-", and write and read permissions on all resources:

        rabbitmqctl set_permissions_globally janeway "^janeway-.*" ".*" ".*"

set_topic_permissions [-p vhost] user exchange write read

    vhost
        The name of the virtual host to which to grant the user access, defaulting to "/".

    user
        The name of the user the permissions apply to in the target virtual host.

    exchange
        The name of the topic exchange to which the authorisation check will be applied.

    write
        A regular expression matching the routing key of the published message.

    read
        A regular expression matching the routing key of the consumed message.

    Sets user topic permissions.

    For example, this command instructs the RabbitMQ broker to let the user named "janeway" publish and consume messages going through the "amp.topic" exchange of the "my-vhost" virtual host with a routing key starting with "janeway-":

        rabbitmqctl set_topic_permissions -p my-vhost janeway amq.topic "^janeway-.*" "^janeway-.*"

    Topic permissions support variable expansion for the following variables: username, vhost, and client_id. Note that client_id is expanded only when using MQTT. The previous example could be made more generic by using "^{username}-.*":

        rabbitmqctl set_topic_permissions -p my-vhost janeway amq.topic "^{username}-.*" "^{username}-.*"

  Monitoring, observability and health checks

environment

    Displays the name and value of each variable in the application environment for each running application.

list_bindings [-p vhost] [bindinginfoitem ...]

    Returns binding details. By default, the bindings for the "/" virtual host are returned. The -p flag can be used to override this default.

    The bindinginfoitem parameter is used to indicate which binding information items to include in the results. The column order in the results will match the order of the parameters. bindinginfoitem can take any value from the list that follows:

    source_name
        The name of the source of messages to which the binding is attached. With non-ASCII characters escaped as in C.

    source_kind
        The kind of the source of messages to which the binding is attached. Currently always exchange. With non-ASCII characters escaped as in C.

    destination_name
        The name of the destination of messages to which the binding is attached. With non-ASCII characters escaped as in C.

    destination_kind
        The kind of destination of messages to which the binding is attached. With non-ASCII characters escaped as in C.

    routing_key
        The binding's routing key with non-ASCII characters escaped as in C.

    arguments
        The binding's arguments.

    If no bindinginfoitem s are specified then all the above items are displayed.

    For example, this command displays the exchange name and queue name of the bindings in the virtual host named "my-vhost"

        rabbitmqctl list_bindings -p my-vhost exchange_name queue_name

list_channels [channelinfoitem ...]

    Returns information on all current channels, the logical containers executing most AMQP commands. This includes channels that are part of ordinary AMQP connections and channels created by various plug-ins and other extensions.

    The channelinfoitem parameter is used to indicate which channel information items to include in the results. The column order in the results will match the order of the parameters. channelinfoitem can take any value from the list that follows:

    pid Id of the Erlang process associated with the connection.

    connection
        Id of the Erlang process associated with the connection to which the channel belongs.

    name
        Readable name for the channel.

    number
        The number of the channel uniquely identifying it within a connection.

    user
        The username associated with the channel.

    vhost
        Virtual host in which the channel operates.

    transactional
        True if the channel is in transactional mode, false otherwise.

    confirm
        True if the channel is in confirm mode, false otherwise.

    consumer_count
        The number of logical AMQP consumers retrieving messages via the channel.

    messages_unacknowledged
        The number of messages delivered via this channel but not yet acknowledged.

    messages_uncommitted
        The number of messages received in an as-yet uncommitted transaction.

    acks_uncommitted
        The number of acknowledgements received in an as-yet uncommitted transaction.

    messages_unconfirmed
        The number of not yet confirmed published messages. On channels not in confirm mode, this remains 0.

    prefetch_count
        QoS prefetch limit for new consumers, 0 if unlimited.

    If no channelinfoitem s are specified then pid, user, consumer_count, and messages_unacknowledged are assumed.

    For example, this command displays the connection process and count of unacknowledged messages for each channel:

        rabbitmqctl list_channels connection messages_unacknowledged

list_ciphers

    Lists cipher suites supported by encoding commands.

    For example, this command instructs the RabbitMQ broker to list all cipher suites supported by encoding commands:

        rabbitmqctl list_ciphers

list_connections [connectioninfoitem ...]

    Returns TCP/IP connection statistics.

    The connectioninfoitem parameter is used to indicate which connection information items to include in the results. The column order in the results will match the order of the parameters. connectioninfoitem can take any value from the list that follows:

    pid Id of the Erlang process associated with the connection.

    name
        Readable name for the connection.

    port
        Server port.

    host
        Server hostname obtained via reverse DNS, or its IP address if reverse DNS failed or was turned off.

    peer_port
        Peer port.

    peer_host
        Peer hostname obtained via reverse DNS, or its IP address if reverse DNS failed or was not enabled.

    ssl Boolean indicating whether the connection is secured with SSL.

    ssl_protocol
        SSL protocol (e.g. "tlsv1").

    ssl_key_exchange
        SSL key exchange algorithm (e.g. "rsa").

    ssl_cipher
        SSL cipher algorithm (e.g. "aes_256_cbc").

    ssl_hash
        SSL hash function (e.g. "sha").

    peer_cert_subject
        The subject of the peer's SSL certificate in RFC4514 form.

    peer_cert_issuer
        The issuer of the peer's SSL certificate, in RFC4514 form.

    peer_cert_serial_number
        The serial number of the peer's SSL certificate, in hexadecimal form.

    peer_cert_validity
        The period for which the peer's SSL certificate is valid.

    state
        Connection state; one of:
        •   starting
        •   tuning
        •   opening
        •   running
        •   flow
        •   blocking
        •   blocked
        •   closing
        •   closed

    channels
        The number of channels using the connection.

    protocol
        The version of the AMQP protocol in use -- currently one of:
        •   {0,9,1}
        •   {0,8,0}

        Note that if a client requests an AMQP 0-9 connection, we treat it as AMQP 0-9-1.

    auth_mechanism
        SASL authentication mechanism used, such as "PLAIN".

    user
        The username associated with the connection.

    vhost
        Virtual hostname with non-ASCII characters escaped as in C.

    timeout
        Connection timeout / negotiated heartbeat interval, in seconds.

    frame_max
        Maximum frame size (bytes).

    channel_max
        Maximum number of channels on this connection.

    client_properties
        Informational properties transmitted by the client during connection establishment.

    recv_oct
        Octets received.

    recv_cnt
        Packets received.

    send_oct
        Octets send.

    send_cnt
        Packets sent.

    send_pend
        Send queue size.

    connected_at
        Date and time this connection was established, as a timestamp.

    If no connectioninfoitem s are specified then user, peer host, peer port, time since flow control, and memory block state are displayed.

    For example, this command displays the send queue size and server port for each connection:

        rabbitmqctl list_connections send_pend port

list_consumers [-p vhost]

    Lists consumers, i.e. subscriptions to a queue's message stream. Each line printed shows, separated by tab characters, the name of the queue subscribed to, the id of the channel process via which the subscription was created and is managed, the consumer tag which uniquely identifies the subscription within a channel, a boolean indicating whether acknowledgements are expected for messages delivered to this consumer, an integer indicating the prefetch limit (with 0 meaning "none"), and any arguments for this consumer.

list_exchanges [-p vhost] [exchangeinfoitem ...]

    Returns exchange details. Exchange details of the "/" virtual host are returned if the -p flag is absent. The -p flag can be used to override this default.

    The exchangeinfoitem parameter is used to indicate which exchange information items to include in the results. The column order in the results will match the order of the parameters. exchangeinfoitem can take any value from the list that follows:

    name
        The name of the exchange with non-ASCII characters escaped as in C.

    type
        The exchange type, such as:
        •   direct
        •   topic
        •   headers
        •   fanout

    durable
        Whether or not the exchange survives server restarts.

    auto_delete
        Whether the exchange will be deleted automatically when no longer used.

    internal
        Whether the exchange is internal, i.e. clients cannot publish to it directly.

    arguments
        Exchange arguments.

    policy
        Policy name for applying to the exchange.

    If no exchangeinfoitem s are specified then exchange name and type are displayed.

    For example, this command displays the name and type for each exchange of the virtual host named "my-vhost":

        rabbitmqctl list_exchanges -p my-vhost name type

list_hashes

    Lists hash functions supported by encoding commands.

    For example, this command instructs the RabbitMQ broker to list all hash functions supported by encoding commands:

        rabbitmqctl list_hashes

list_queues [-p vhost] [--offline | --online | --local] [queueinfoitem ...]

    Returns queue details. Queue details of the "/" virtual host are returned if the -p flag is absent. The -p flag can be used to override this default.

    Displayed queues can be filtered by their status or location using one of the following mutually exclusive options:

    --offline
        List only those durable queues that are not currently available (more specifically, their leader node isn't).

    --online
        List queues that are currently available (their leader node is).

    --local
        List only those queues whose leader replica is located on the current node.

    The queueinfoitem parameter is used to indicate which queue information items to include in the results. The column order in the results will match the order of the parameters. queueinfoitem can take any value from the list that follows:

    name
        The name of the queue with non-ASCII characters escaped as in C.

    durable
        Whether or not the queue survives server restarts.

    auto_delete
        Whether the queue will be deleted automatically when no longer used.

    arguments
        Queue arguments.

    policy
        Name of the user policy that is applied to the queue.

    operator_policy
        Name of the operator policy that is applied to the queue.

    effective_policy_definition
        Effective policy definition for the queue: both user and operator policy definitions merged.

    pid Erlang process identifier of the queue.

    owner_pid
        Id of the Erlang process of the connection which is the exclusive owner of the queue. Empty if the queue is non-exclusive.

    exclusive
        True if the queue is exclusive (i.e. has owner_pid), false otherwise.

    exclusive_consumer_pid
        Id of the Erlang process representing the channel of the exclusive consumer subscribed to this queue. Empty if there is no exclusive consumer.

    exclusive_consumer_tag
        The consumer tag of the exclusive consumer subscribed to this queue. Empty if there is no exclusive consumer.

    messages_ready
        The number of messages ready to be delivered to clients.

    messages_unacknowledged
        The number of messages delivered to clients but not yet acknowledged.

    messages
        The sum of ready and unacknowledged messages (queue depth).

    messages_ready_ram
        The number of messages from messages_ready which are resident in ram.

    messages_unacknowledged_ram
        The number of messages from messages_unacknowledged which are resident in ram.

    messages_ram
        Total number of messages which are resident in ram.

    messages_persistent
        Total number of persistent messages in the queue (will always be 0 for transient queues).

    message_bytes
        The sum of the size of all message bodies in the queue. This does not include the message properties (including headers) or any overhead.

    message_bytes_ready
        Like message_bytes but counting only those messages ready to be delivered to clients.

    message_bytes_unacknowledged
        Like message_bytes but counting only those messages delivered to clients but not yet acknowledged.

    message_bytes_ram
        Like message_bytes but counting only those messages that are currently held in RAM.

    message_bytes_persistent
        Like message_bytes but counting only those messages which are persistent.

    head_message_timestamp
        The timestamp property of the first message in the queue, if present. Timestamps of messages only appear when they are in the paged-in state.

    disk_reads
        Total number of times messages have been read from disk by this queue since it started.

    disk_writes
        Total number of times messages have been written to disk by this queue since it started.

    consumers
        The number of consumers.

    consumer_utilisation
        Fraction of the time (between 0.0 and 1.0) that the queue is able to immediately deliver messages to consumers. This can be less than 1.0 if consumers are limited by network congestion or prefetch count.

    memory
        Bytes of memory allocated by the runtime for the queue, including stack, heap, and internal structures.

    mirror_pids
        If the queue is mirrored, this lists the IDs of the mirrors (follower replicas). To learn more, see the RabbitMQ Mirroring guide: https://www.rabbitmq.com/docs/3.13/ha

    synchronised_mirror_pids
        If the queue is mirrored, this gives the IDs of the mirrors (follower replicas) which are in sync with the leader replica. To learn more, see the RabbitMQ Mirroring guide: https://www.rabbitmq.com/docs/3.13/ha

    state
        The state of the queue. Normally "running", but may be "{syncing, message_count}" if the queue is synchronising.

        Queues that are located on cluster nodes that are currently down will be shown with a status of "down" (and most other queueinfoitem will be unavailable).

    type
        Queue type, one of: quorum, stream, classic.

    If no queueinfoitem s are specified then queue name and depth are displayed.

    For example, this command displays the depth and number of consumers for each queue of the virtual host named "my-vhost"

        rabbitmqctl list_queues -p my-vhost messages consumers

list_unresponsive_queues [--local] [--queue-timeout seconds] [queueinfoitem ...] [--no-table-headers]

    Tests queue leader replicas to respond within the given timeout. Lists those that did not respond in time.

    Displayed queues can be filtered by their status or location using one of the following mutually exclusive options:

    --all
        List all queues.

    --local
        List only those queues whose leader replica is located on the current node.

    The queueinfoitem parameter is used to indicate which queue information items to include in the results. The column order in the results will match the order of the parameters. queueinfoitem can take any value from the list that follows:

    name
        The name of the queue with non-ASCII characters escaped as in C.

    durable
        Whether or not the queue should survive server restarts.

    auto_delete
        Whether the queue will be deleted automatically when all of its explicit bindings are deleted.

    arguments
        Queue arguments.

    policy
        Effective policy name for the queue.

    pid Erlang process identifier of the leader replica.

    recoverable_mirrors
        Erlang process identifiers of the mirror replicas that are considered reachable (available).

    type
        Queue type, one of: quorum, stream, classic.

    For example, this command lists only those unresponsive queues whose leader replica is hosted on the target node.
        rabbitmqctl list_unresponsive_queues --local name

ping

    Checks that the node OS process is up, registered with EPMD, and CLI tools can authenticate with it

    Example:
        rabbitmqctl ping -n rabbit@hostname

report

    Generate a server status report containing a concatenation of all server status information for support purposes. The output should be redirected to a file when accompanying a support request.

    For example, this command creates a server report which may be attached to a support request email:

        rabbitmqctl report > server_report.txt

schema_info [--no-table-headers] [column ...]

    Lists schema database tables and their properties

    For example, this command lists the table names and their active replicas:

        rabbitmqctl schema_info name active_replicas

status

    Displays broker status information such as the running applications on the current Erlang node, RabbitMQ and Erlang versions, OS name, and memory and file descriptor statistics. (See the cluster_status command to find out which nodes are clustered and running.)

    For example, this command displays information about the RabbitMQ broker:

        rabbitmqctl status

  Runtime Parameters and Policies
Certain features of RabbitMQ (such as the Federation plugin) are controlled by dynamic, cluster-wide parameters. There are 2 kinds of parameters: parameters scoped to a virtual host and global parameters. Each vhost-scoped parameter consists of a component name, a name, and a value. The component name and name are strings, and the value is a valid JSON document. A global parameter consists of a name and value. The name is a string and the value is an arbitrary Erlang data structure. Parameters can be set, cleared, and listed. In general, you should refer to the documentation for the feature in question to see how to set parameters.

Policies is a feature built on top of runtime parameters. Policies are used to control and modify the behaviour of queues and exchanges on a cluster-wide basis. Policies apply within a given vhost and consist of a name, pattern, definition, and an optional priority. Policies can be set, cleared, and listed.

clear_global_parameter name

    Clears a global runtime parameter. This is similar to clear_parameter but the key-value pair isn't tied to a virtual host.

    name
        The name of the global runtime parameter being cleared.

    For example, this command clears the global runtime parameter "mqtt_default_vhosts":

        rabbitmqctl clear_global_parameter mqtt_default_vhosts

clear_parameter [-p vhost] component_name key

    Clears a parameter.

    component_name
        The name of the component for which the parameter is being cleared.

    name
        The name of the parameter being cleared.

    For example, this command clears the parameter "node01" for the "federation-upstream" component in the default virtual host:

        rabbitmqctl clear_parameter federation-upstream node01

list_global_parameters

    Lists all global runtime parameters. This is similar to list_parameters but the global runtime parameters are not tied to any virtual host.

    For example, this command lists all global parameters:

        rabbitmqctl list_global_parameters

list_parameters [-p vhost]

    Lists all parameters for a virtual host.

    For example, this command lists all parameters in the default virtual host:

        rabbitmqctl list_parameters

set_global_parameter name value

    Sets a global runtime parameter. This is similar to set_parameter but the key-value pair isn't tied to a virtual host.

    name
        The name of the global runtime parameter being set.

    value
        The value for the global runtime parameter, as a JSON document. In most shells you are very likely to need to quote this.

    For example, this command sets the global runtime parameter "mqtt_default_vhosts" to the JSON document {"O=client,CN=guest":"/"}:

        rabbitmqctl set_global_parameter mqtt_default_vhosts '{"O=client,CN=guest":"/"}'

set_parameter [-p vhost] component_name name value

    Sets a parameter.

    component_name
        The name of the component for which the parameter is being set.

    name
        The name of the parameter being set.

    value
        The value for the parameter, as a JSON document. In most shells you are very likely to need to quote this.

    For example, this command sets the parameter "node01" for the "federation-upstream" component in the default virtual host to the following JSON "guest":

        rabbitmqctl set_parameter federation-upstream node01 '{"uri":"amqp://user:password@server/%2F","ack-mode":"on-publish"}'

list_policies [-p vhost]

    Lists all policies for a virtual host.

    For example, this command lists all policies in the default virtual host:

        rabbitmqctl list_policies

set_operator_policy [-p vhost] [--priority priority] [--apply-to apply-to] name pattern definition

    Sets an operator policy that overrides a subset of arguments in user policies. Arguments are identical to those of set_policy.

    Supported arguments are:
    •   expires
    •   message-ttl
    •   max-length
    •   max-length-bytes

set_policy [-p vhost] [--priority priority] [--apply-to apply-to] name pattern definition

    Sets a policy.

    name
        The name of the policy.

    pattern
        The regular expression allows the policy to apply if it matches a resource name.

    definition
        The definition of the policy, as a JSON document. In most shells you are very likely to need to quote this.

    priority
        The priority of the policy as an integer. Higher numbers indicate greater precedence. The default is 0.

    apply-to
        Which types of objects this policy should apply to. Possible values are:
        •   queues (all queue types, including streams)
        •   classic_queues (classic queues only)
        •   quorum_queues (quorum queues only)
        •   streams (streams only)
        •   exchanges
        •   all
        The default is all.

    For example, this command sets the policy "federate-me" in the default virtual host so that built-in exchanges are federated:

        rabbitmqctl set_policy federate-me ^amq. '{"federation-upstream-set":"all"}'

clear_policy [-p vhost] name

    Clears a policy.

    name
        The name of the policy being cleared.

    For example, this command clears the "federate-me" policy in the default virtual host:

        rabbitmqctl clear_policy federate-me

clear_operator_policy [-p vhost] name

    Clears an operator policy. Arguments are identical to those of clear_policy.

list_operator_policies [-p vhost]

    Lists operator policy overrides for a virtual host. Arguments are identical to those of list_policies.

  Virtual hosts
Note that rabbitmqctl manages the RabbitMQ internal user database. Permissions for users from any alternative authorisation backend will not be visible to rabbitmqctl.

add_vhost vhost [--description desc --tags tags --default-queue-type default-q-type]

    vhost
        The name of the virtual host entry to create.

    desc
        Arbitrary virtual host description, e.g. its purpose, for the operator's convenience.

    tags
        A comma-separated list of virtual host tags for the operator's convenience.

    default-q-type
        If clients do not specify queue type explicitly, this type will be used. One of: quorum, stream.

    Creates a virtual host.

    For example, this command instructs the RabbitMQ broker to create a new virtual host called "project9_dev_18":

        rabbitmqctl add_vhost project9_dev_18 --description 'Dev environment no. 18' --tags dev,project9

clear_vhost_limits [-p vhost]

    Clears virtual host limits.

    For example, this command clears vhost limits in vhost "qa_env":

        rabbitmqctl clear_vhost_limits -p qa_env

delete_vhost vhost

    vhost
        The name of the virtual host entry to delete.

    Deletes a virtual host.

    Deleting a virtual host deletes all its exchanges, queues, bindings, user permissions, parameters, and policies.

    For example, this command instructs the RabbitMQ broker to delete the virtual host called "test":

        rabbitmqctl delete_vhost a-vhost

list_vhost_limits [-p vhost] [--global] [--no-table-headers]

    Displays configured virtual host limits.

    --global
        Show limits for all vhosts. Suppresses the -p parameter.

restart_vhost [-p vhost]

    vhost
        The name of the virtual host entry to restart, defaulting to "/".

    Restarts a failed vhost data stores and queues.

    For example, this command instructs the RabbitMQ broker to restart a virtual host called "test":

        rabbitmqctl restart_vhost test

set_vhost_limits [-p vhost] definition

    Sets virtual host limits.

    definition
        The definition of the limits, as a JSON document. In most shells you are very likely to need to quote this.

        Recognised limits are:
        •   max-connections
        •   max-queues

        Use a negative value to specify "no limit".

    For example, this command limits the maximum number of concurrent connections in vhost "qa_env" to 64:

        rabbitmqctl set_vhost_limits -p qa_env '{"max-connections": 64}'

    This command limits the maximum number of queues in vhost "qa_env" to 256:

        rabbitmqctl set_vhost_limits -p qa_env '{"max-queues": 256}'

    This command clears the maximum number of connections limit in vhost "qa_env":

        rabbitmqctl set_vhost_limits -p qa_env '{"max-connections": -1}'

    This command disables client connections in vhost "qa_env":

        rabbitmqctl set_vhost_limits -p qa_env '{"max-connections": 0}'

set_user_limits] username] definition

    Sets user limits.

    username
        The name of the user to apply limits to

    definition
        The definition of the limits, as a JSON document. In most shells you are very likely to need to quote this.

        Recognised limits are:
        •   max-connections
        •   max-channels

        Use a negative value to specify "no limit".

    For example, this command limits the maximum number of concurrent connections a user is allowed to open "limited_user" to 64:

        rabbitmqctl set_user_limits limited_user '{"max-connections": 64}'

    This command limits the maximum number of channels a user is allowed to open on a connection "limited_user" to 16:

        rabbitmqctl set_user_limits limited_user '{"max-channels": 16}'

    This command clears the maximum number of connections limit for user "limited_user":

        rabbitmqctl set_user_limits limited_user '{"max-connections": 0}'

clear_user_limits] username] limit

    Clears user limits.

    username
        The name of the user to clear the limits of

    limit
        The name of the limit or "all" to clear all limits at once.

    Recognised limits are:
    •   max-connections
    •   max-channels

    For example, this command clears the maximum connection limits of user "limited_user":

        rabbitmqctl clear_user_limits limited_user 'max-connections'

    This command clears all limits of user "limited_user":

        rabbitmqctl clear_user_limits limited_user all

trace_off [-p vhost]

    vhost
        The name of the virtual host for which to stop tracing.

    Stops tracing.

trace_on [-p vhost]

    vhost
        The name of the virtual host for which to start tracing.

    Starts tracing. Note that the trace state is not persistent; it will revert to being off if the node is restarted.

  Configuration

decode value passphrase [--cipher cipher] [--hash hash] [--iterations iterations]

    value passphrase
        Value to decrypt (as produced by the encode command) and passphrase.

        For example:

            rabbitmqctl decode '{encrypted, <<"...">>}' mypassphrase

    --cipher cipher --hash hash --iterations iterations
        Options to specify the decryption settings. They can be used independently.

        For example:

            rabbitmqctl decode --cipher blowfish_cfb64 --hash sha256 --iterations 10000 '{encrypted,<<"...">>} mypassphrase

encode value passphrase [--cipher cipher] [--hash hash] [--iterations iterations]

    value passphrase
        Value to encrypt and passphrase.

        For example:

            rabbitmqctl encode '<<"guest">>' mypassphrase

    --cipher cipher --hash hash --iterations iterations
        Options to specify the encryption settings. They can be used independently.

        For example:

            rabbitmqctl encode --cipher blowfish_cfb64 --hash sha256 --iterations 10000 '<<"guest">>' mypassphrase

set_cluster_name name

    Sets the cluster name to name. The cluster name is announced to clients on connection, and used by the federation and shovel plugins to record where a message has been. The cluster name is by default derived from the hostname of the first node in the cluster but can be changed.

    For example, this sets the cluster name to "london":

        rabbitmqctl set_cluster_name london

set_disk_free_limit disk_limit

    disk_limit
        Lower bound limit as an integer in bytes or a string with a memory unit symbol (see vm_memory_high_watermark), e.g. 512M or 1G. Once free disk space reaches the limit, a disk alarm will be set.

set_disk_free_limit mem_relative fraction

    fraction
        Limit relative to the total amount available RAM as a non-negative floating point number. Values lower than 1.0 can be dangerous and should be used carefully.

set_log_level [log_level]

    Sets log level in the running node

    Supported log_level values are:
    •   debug
    •   info
    •   warning
    •   error
    •   critical
    •   none

    Example:
        rabbitmqctl set_log_level debug

set_vm_memory_high_watermark fraction

    fraction
        The new memory threshold fraction at which flow control is triggered, as a floating point number greater than or equal to 0.

set_vm_memory_high_watermark [absolute] memory_limit

    memory_limit
        The new memory limit at which flow control is triggered, expressed in bytes as an integer number greater than or equal to 0 or as a string with memory unit symbol(e.g. 512M or 1G). Available unit symbols are:

        k, kiB
            kibibytes (2^10 bytes)

        M, MiB
            mebibytes (2^20 bytes)

        G, GiB
            gibibytes (2^30 bytes)

        kB  kilobytes (10^3 bytes)

        MB  megabytes (10^6 bytes)

        GB  gigabytes (10^9 bytes)

  Feature flags

enable_feature_flag feature_flag

    Enables a feature flag on the target node.

    Example:
        rabbitmqctl enable_feature_flag restart_streams

    You can also enable all feature flags by specifying "all":
        rabbitmqctl enable_feature_flag all

list_feature_flags [column ...]

    Lists feature flags

    Supported column values are:
    •   name
    •   state
    •   stability
    •   provided_by
    •   desc
    •   doc_url

    Example:
        rabbitmqctl list_feature_flags name state

  Connection Operations

close_all_connections [-p vhost] [--global] [--per-connection-delay delay] [--limit limit] explanation

    -p vhost
        The name of the virtual host for which connections should be closed. Ignored when --global is specified.

    --global
        If connections should be closed for all vhosts. Overrides -p

    --per-connection-delay delay
        Time in milliseconds to wait after each connection closing.

    --limit limit
        The number of connections to close. Only works per vhost. Ignored when --global is specified.

    explanation
        Explanation string.

    Instructs the broker to close all connections for the specified vhost or entire RabbitMQ node.

    For example, this command instructs the RabbitMQ broker to close 10 connections on "qa_env" vhost, passing the explanation "Please close":

        rabbitmqctl close_all_connections -p qa_env --limit 10 'Please close'

    This command instructs broker to close all connections to the node:

        rabbitmqctl close_all_connections --global

close_connection connectionpid explanation

    connectionpid
        Id of the Erlang process associated with the connection to close.

    explanation
        Explanation string.

    Instructs the broker to close the connection associated with the Erlang process id connectionpid (see also the list_connections command), passing the explanation string to the connected client as part of the AMQP connection shutdown protocol.

    For example, this command instructs the RabbitMQ broker to close the connection associated with the Erlang process id "<rabbit@tanto.4262.0>", passing the explanation "go away" to the connected client:

        rabbitmqctl close_connection "<rabbit@tanto.4262.0>" "go away"

  Misc

eval expression

    Evaluates an Erlang expression on the target node

  Queue Operations

delete_queue queue_name [--if-empty | -e] [--if-unused | -u]

    queue_name
        The name of the queue to delete.

    --if-empty
        Delete the queue if it is empty (has no messages ready for delivery)

    --if-unused
        Delete the queue only if it has no consumers

    Deletes a queue.

purge_queue [-p vhost] queue

    queue
        The name of the queue to purge.

    Purges a queue (removes all messages in it).

PLUGIN COMMANDS
RabbitMQ plugins can extend the rabbitmqctl tool to add new commands when enabled. Currently available commands can be found in the rabbitmqctl help output. The following commands are added by RabbitMQ plugins, available in the default distribution:

  Shovel plugin

shovel_status
    Prints a list of configured Shovels

delete_shovel [-p vhost] name
    Instructs the RabbitMQ node to delete the configured shovel by name.

  Federation plugin

federation_status [--only-down]
    Prints a list of federation links.

    --only-down
        Only list federation links that are not running.

restart_federation_link link_id
    Instructs the RabbitMQ node to restart the federation link with the specified link_id.

  AMQP 1.0 plugin

list_amqp10_connections [amqp10_connectioninfoitem ...]
    Similar to the list_connections command, but returns fields that make sense for AMQP-1.0 connections. amqp10_connectioninfoitem parameter is used to indicate which connection information items to include in the results. The column order in the results will match the order of the parameters. amqp10_connectioninfoitem can take any value from the list that follows:

    pid Id of the Erlang process associated with the connection.

    auth_mechanism
        SASL authentication mechanism used, such as "PLAIN".

    host
        Server hostname obtained via reverse DNS, or its IP address if reverse DNS failed or was turned off.

    frame_max
        Maximum frame size (bytes).

    timeout
        Connection timeout / negotiated heartbeat interval, in seconds.

    user
        Username associated with the connection.

    state
        Connection state; one of:
        •   starting
        •   waiting_amqp0100
        •   securing
        •   running
        •   blocking
        •   blocked
        •   closing
        •   closed

    recv_oct
        Octets received.

    recv_cnt
        Packets received.

    send_oct
        Octets send.

    send_cnt
        Packets sent.

    ssl Boolean indicating whether the connection is secured with SSL.

    ssl_protocol
        SSL protocol (e.g. "tlsv1").

    ssl_key_exchange
        SSL key exchange algorithm (e.g. "rsa").

    ssl_cipher
        SSL cipher algorithm (e.g. "aes_256_cbc").

    ssl_hash
        SSL hash function (e.g. "sha").

    peer_cert_subject
        The subject of the peer's SSL certificate, in RFC4514 form.

    peer_cert_issuer
        The issuer of the peer's SSL certificate, in RFC4514 form.

    peer_cert_serial_number
        The serial number of the peer's SSL certificate, in hexadecimal form.

    peer_cert_validity
        The period for which the peer's SSL certificate is valid.

    node
        The node name of the RabbitMQ node to which the connection is established.

  MQTT plugin

list_mqtt_connections [mqtt_connectioninfoitem]
    Similar to the list_connections command, but returns fields that make sense for MQTT connections. mqtt_connectioninfoitem parameter is used to indicate which connection information items to include in the results. The column order in the results will match the order of the parameters. mqtt_connectioninfoitem can take any value from the list that follows:

    host
        Server hostname obtained via reverse DNS, or its IP address if reverse DNS failed or was turned off.

    port
        Server port.

    peer_host
        Peer hostname obtained via reverse DNS, or its IP address if reverse DNS failed or was not enabled.

    peer_port
        Peer port.

    protocol
        MQTT protocol version, which can be one of the following:
        •   {'MQTT', N/A}
        •   {'MQTT', 3.1.0}
        •   {'MQTT', 3.1.1}

    channels
        The number of channels using the connection.

    channel_max
        Maximum number of channels on this connection.

    frame_max
        Maximum frame size (bytes).

    client_properties
        Informational properties transmitted by the client during connection establishment.

    ssl Boolean indicating whether the connection is secured with SSL.

    ssl_protocol
        SSL protocol (e.g. "tlsv1").

    ssl_key_exchange
        SSL key exchange algorithm (e.g. "rsa").

    ssl_cipher
        SSL cipher algorithm (e.g. "aes_256_cbc").

    ssl_hash
        SSL hash function (e.g. "sha").

    conn_name
        Readable name for the connection.

    connection_state
        Connection state; one of:
        •   starting
        •   running
        •   blocked

    connection
        Id of the Erlang process associated with the internal amqp direct connection.

    consumer_tags
        A tuple of consumer tags for QOS0 and QOS1.

    message_id
        The last Packet ID sent in a control message.

    client_id
        MQTT client identifier for the connection.

    clean_sess
        MQTT clean session flag.

    will_msg
        MQTT Will message sent in CONNECT frame.

    exchange
        Exchange to route MQTT messages configured in rabbitmq_mqtt application environment.

    ssl_login_name
        SSL peer cert auth name

    retainer_pid
        Id of the Erlang process associated with retain storage for the connection.

    user
        Username associated with the connection.

    vhost
        Virtual host name with non-ASCII characters escaped as in C.

decommission_mqtt_node
    Before the plugin is disabled on a node, or a node removed from the cluster, it must be decommissioned.

    For example, this command will remove the node rabbit@stringer:

        rabbitmqctl decommission_mqtt_node rabbit@stringer

  STOMP plugin

list_stomp_connections [stomp_connectioninfoitem]
    Similar to the list_connections command, but returns fields that make sense for STOMP connections. stomp_connectioninfoitem parameter is used to indicate which connection information items to include in the results. The column order in the results will match the order of the parameters. stomp_connectioninfoitem can take any value from the list that follows:

    conn_name
        Readable name for the connection.

    connection
        Id of the Erlang process associated with the internal amqp direct connection.

    connection_state
        Connection state; one of:
        •   running
        •   blocking
        •   blocked

    session_id
        STOMP protocol session identifier

    channel
        AMQP channel associated with the connection

    version
        Negotiated STOMP protocol version for the connection.

    implicit_connect
        Indicates if the connection was established using implicit connect (without CONNECT frame)

    auth_login
        Effective username for the connection.

    auth_mechanism
        STOMP authorization mechanism. Can be one of:
        •   config
        •   ssl
        •   stomp_headers

    port
        Server port.

    host
        Server hostname obtained via reverse DNS, or its IP address if reverse DNS failed or was not enabled.

    peer_port
        Peer port.

    peer_host
        Peer hostname obtained via reverse DNS, or its IP address if reverse DNS failed or was not enabled.

    protocol
        STOMP protocol version, which can be one of the following:
        •   {'STOMP', 0}
        •   {'STOMP', 1}
        •   {'STOMP', 2}

    channels
        The number of channels using the connection.

    channel_max
        Maximum number of channels on this connection.

    frame_max
        Maximum frame size (bytes).

    client_properties
        Informational properties transmitted by the client during connection

    ssl Boolean indicating whether the connection is secured with SSL.

    ssl_protocol
        TLS protocol (e.g. "tlsv1").

    ssl_key_exchange
        TLS key exchange algorithm (e.g. "rsa").

    ssl_cipher
        TLS cipher algorithm (e.g. "aes_256_cbc").

    ssl_hash
        SSL hash function (e.g. "sha").

  Management agent plugin

reset_stats_db [--all]
    Reset the management stats database for the RabbitMQ node.

    --all
        Reset the stats database for all nodes in the cluster.

SEE ALSO
rabbitmq-diagnostics(8), rabbitmq-plugins(8), rabbitmq-server(8), rabbitmq-queues(8), rabbitmq-streams(8), rabbitmq-upgrade(8), rabbitmq-service(8), rabbitmq-env.conf(5)

AUTHOR
The RabbitMQ Team <contact-tanzu-data.pdl@broadcom.com>