-- This file was included in WWP MIB release 04-16-00-0047

 --
 -- CIENA-CES-MODULE-MIB.my
 --

 CIENA-CES-MODULE-MIB DEFINITIONS ::= BEGIN

 IMPORTS       
   Integer32, TimeTicks, Unsigned32, NOTIFICATION-TYPE, OBJECT-TYPE, MODULE-IDENTITY         
       FROM SNMPv2-SMI        
   DisplayString, MacAddress, TEXTUAL-CONVENTION
       FROM SNMPv2-TC 
   OBJECT-GROUP, NOTIFICATION-GROUP
       FROM SNMPv2-CONF              
   cienaGlobalSeverity, cienaGlobalMacAddress
   		FROM CIENA-GLOBAL-MIB    
   CienaGlobalState
   		FROM CIENA-TC
   cienaCesNotifications, cienaCesConfig
        FROM CIENA-SMI;
   
 cienaCesModuleMIB MODULE-IDENTITY
			LAST-UPDATED "201401230000Z"
			ORGANIZATION
				"Ciena Corp."
			CONTACT-INFO
        	"  Mib Meister
               115 North Sullivan Road
               Spokane Valley, WA 99037
               USA            
               Phone:  +1 509 242 9000
               Email:  support@ciena.com"        
	      	DESCRIPTION
		       "This module defines the module configuration objects and also the objects required for
		       module related notifications."

            REVISION    "201401230000Z"
            DESCRIPTION
            "Augmented TceHealthCategory TEXTUAL-CONVENTION with the following enumerations:
		powerParams(34), powerOutputVoltage(35)"
 

           REVISION    "201312050000Z"
            DESCRIPTION
            "Augmented TceHealthCategory TEXTUAL-CONVENTION with the following enumerations:
              smFabric(30), spi(31), slotResource(32), tempIom(33).
             Augmented cienaCesModuleResourceHealthSubCategory with the following enumerations:
              pltfmLmPowerBudget(22), pltfmPpIngressL2Xform(23), pltfmPpEgressL2Xform(24), pltfmPpInternalTcam(25),
              pltfmNpMaintPoint(26), pltfmNpMaintPointSession(27), pltfmNpFastTimer300Hz(28), pltfmNpFastTimer10msec(29),
              pltfmNpFastTimer100msec(30), pltfmNpFastTimer1sec(31), pltfmNpSlowTimer(32), pltfmNpWatchdogTimer(33),
              pltfmNpProtectionGroup(34)."

            REVISION    "201304160000Z"
            DESCRIPTION
            " Added cienaCesModuleSlotName to the cienaCesModuleEntry"

            REVISION    "201303280000Z"
            DESCRIPTION
            " Added cienaCesModuleIDPTable ."

            REVISION    "201303070000Z"
            DESCRIPTION
            " Changed cienaCesModuleHealthStatusNormalNotification to cienaCesModuleHealthStatusGoodNotification."

            REVISION    "201208230000Z"
            DESCRIPTION
            " Changed cienaCesModuleOperState enum hitlessReinit to hitlessInit."

            REVISION    "201206280000Z"
            DESCRIPTION
            " Added pltfmBscp, pltfmHighRateTokenBucket, pltfmLowRateTokenBucket, pltfmParentMeter, pltfmChildMeter, 
	      pltfmL2UserTypes, and logicalInterfaces to cienaCesModuleResourceHealthSubCategory."

            REVISION    "201206140000Z"
            DESCRIPTION
            " Added usbFlash and linxstats to TceHealthCategory."

            REVISION    "201106060000Z"
            DESCRIPTION
            " Added new traps cienaCesModuleSwitchFabricDisruptedUnrecoverableNotification,
		      cienaCesModuleSwitchFabricDisruptedRecoverableNotification."

		    REVISION    "201012130000Z"
            DESCRIPTION
		   		 "cienaCesModulePOSTErrorTable has been modified and new objects were added."

			REVISION "201005100000Z"
	      	DESCRIPTION
		       "Initial creation."
          ::= { cienaCesConfig 2 }
                  
 --
 -- Node definitions
 --
   
 cienaCesModuleMIBObjects OBJECT IDENTIFIER ::= { cienaCesModuleMIB 1 }
 
 cienaCesModuleNotifAttrs OBJECT IDENTIFIER ::= { cienaCesModuleMIBObjects 3 }
 cienaCesModuleGlobal       OBJECT IDENTIFIER ::= { cienaCesModuleMIBObjects 1 }
 cienaCesModule       OBJECT IDENTIFIER ::= { cienaCesModuleMIBObjects 2 }  
 cienaCesSwModule	  OBJECT IDENTIFIER ::= { cienaCesModule 4 }
 
 cienaCesModuleMIBNotificationPrefix  OBJECT IDENTIFIER ::= { cienaCesNotifications 3 } 
 cienaCesModuleMIBNotifications       OBJECT IDENTIFIER ::=  
                       { cienaCesModuleMIBNotificationPrefix 0 }
 
 --
 --Conformance 
 --
 cienaCesModuleConformance		OBJECT IDENTIFIER ::= { cienaCesModuleMIB 2 }
 cienaCesModuleMIBCompliances	OBJECT IDENTIFIER ::= { cienaCesModuleConformance 1 }
 cienaCesModuleMIBGroups		OBJECT IDENTIFIER ::= { cienaCesModuleConformance 2 }
 --
 -- Textual convention
 --                    
 
 SwPkgStatus ::= TEXTUAL-CONVENTION
     STATUS          current
     DESCRIPTION     "Last Xgrade command operational state."
     SYNTAX          INTEGER  {
	                     unknown(0),
	                     good(1),
	                     invalid(2),
			     loading(3),
			     syncing(4),
			     waiting(5),
	                     burning(6),
                             empty(7)
                     }

 SwModuleState ::= TEXTUAL-CONVENTION
     STATUS          current
     DESCRIPTION     "Xgrade state."
     SYNTAX          INTEGER  {
	                     installing(1),
	                     booting(2),
	                     initializing(3),
	                     good(4),
	                     failed(5),
	                     disabled(6),
	                     empty(7),
	                     unsupported(8),
	                     unknown(9)
                     }
 
  TceHealthCategory ::= TEXTUAL-CONVENTION
     STATUS       current
     DESCRIPTION  "CES system health categories."
     SYNTAX       INTEGER { 
                     unknown(1),
                     cpu(2),
                     datapath(3),
                     ethernet(4),
                     fabric(5), 
                     sm(6),
                     tempSm(7),
                     samplesSm(8),
                     disk(9),
                     tempModule(10),
                     samplesModule(11),
                     fanTray(12),
                     fanTraySpeedMismatch(13),
                     fanSpeedMismatch(14),
                     tempFan(15),
                     samplesFan(16),
		     fanRpm(17),
		     power(18),
                     feedPower(19),
                     systemResource(20),
                     memory(21),
                     mac(22),
                     i2c(23),
                     flash(24),
                     transceiver(25),
                     link(26),
                     iomStatus(27),
		     usbFlash(28),
		     linxstats(29),
		     smFabric(30),
		     spi(31),
		     slotResource(32),
		     tempIom(33),
		     powerParams(34),
		     powerOutputVoltage(35)
     }
                       
 TceHealthStatus ::= TEXTUAL-CONVENTION
     STATUS       current
     DESCRIPTION  "CES system health status code."
     SYNTAX       INTEGER {
                     unknown(1),
                     normal(2),
                     warning(3),
                     degraded(4),
                     faulted(5)
     }         
                  
 HealthOriginType ::= TEXTUAL-CONVENTION
     STATUS       current
     DESCRIPTION  "Origin of the resource."
     SYNTAX       INTEGER {         
     						 none(0),
		                     chassis(1),
 							 slot(2),
 							 port(3),
 							 unit(4)
     } 
 
 --
 -- Global parameters
 --
 cienaCesModuleGlobalPostState          OBJECT-TYPE
     SYNTAX         CienaGlobalState                                     
     MAX-ACCESS      read-only
     STATUS          current
     DESCRIPTION
           "This object indicates the global POST state for the system."               
     ::= { cienaCesModuleGlobal 1 } 

 --
 --  The Module Table
 --

 cienaCesModuleTable OBJECT-TYPE
     SYNTAX     SEQUENCE OF CienaCesModuleEntry
     MAX-ACCESS not-accessible
     STATUS     current
     DESCRIPTION
            "The (conceptual) table listing the modules configured and detected."
    ::= { cienaCesModule 1 }

 cienaCesModuleEntry OBJECT-TYPE
    SYNTAX     CienaCesModuleEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the cienaCesModuleTable."
    INDEX      { cienaCesModuleChassisIndx, cienaCesModuleShelfIndx, cienaCesModuleSlotIndx }
    ::= { cienaCesModuleTable 1 }
 
 CienaCesModuleEntry ::= SEQUENCE {                  
    cienaCesModuleChassisIndx           Unsigned32,
    cienaCesModuleShelfIndx             Unsigned32,
    cienaCesModuleSlotIndx              Unsigned32,
    cienaCesModuleModel                 DisplayString,
    cienaCesModuleType                  INTEGER,
    cienaCesModuleDescription           DisplayString,    
    cienaCesModuleAdminState            INTEGER,
    cienaCesModuleOperState             INTEGER,
    cienaCesModuleProtectionRole        INTEGER,    
    cienaCesModuleStandbyStatus	        INTEGER,
    cienaCesModuleLastRebootReason      INTEGER,    
    cienaCesModuleAdminPostState        INTEGER,
    cienaCesModuleOperPostState         INTEGER,
    cienaCesModuleTrapState				CienaGlobalState,
    cienaCesModuleChassisNotifIndx		Unsigned32,
    cienaCesModuleShelfNotifIndx		Unsigned32,
    cienaCesModuleSlotNotifIndx			Unsigned32,
    cienaCesModuleSlotName			DisplayString
    }                                 

 cienaCesModuleChassisIndx          OBJECT-TYPE
     SYNTAX          Unsigned32 (1..1)
     MAX-ACCESS      not-accessible
     STATUS          current
     DESCRIPTION
           "This object indicates the chassis index for the module."               
     ::= { cienaCesModuleEntry 1 }
     
 cienaCesModuleShelfIndx          OBJECT-TYPE
     SYNTAX          Unsigned32 (0..992)
     MAX-ACCESS      not-accessible
     STATUS          current
     DESCRIPTION
           "This object indicates the shelf index for the module."               
     ::= { cienaCesModuleEntry 2 }

 cienaCesModuleSlotIndx          OBJECT-TYPE
     SYNTAX          Unsigned32 (1..38)	
     MAX-ACCESS      not-accessible
     STATUS          current
     DESCRIPTION
           "This object indicates the slot index for the module."
     ::= { cienaCesModuleEntry 3 }
     
 cienaCesModuleModel   OBJECT-TYPE
     SYNTAX          DisplayString
     MAX-ACCESS      read-only
     STATUS          current
     DESCRIPTION
           "This object indicates the module model."               
     ::= { cienaCesModuleEntry 4 }  
  
 cienaCesModuleType   OBJECT-TYPE
     SYNTAX          INTEGER { 
     					invalid(0),
                        unknown(1),
                        ctm(2),
                        lm(3),
                        sm(4)
                     }
     MAX-ACCESS      read-only
     STATUS          current
     DESCRIPTION
           "This object indicates whether this is a single module, control timing module, 
           I/O module or fabric module."                                  
     ::= { cienaCesModuleEntry 5 }
        
 cienaCesModuleDescription OBJECT-TYPE
     SYNTAX      DisplayString
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
        "This object indicates the description of the module."
     ::= { cienaCesModuleEntry 6 } 
     
  cienaCesModuleAdminState   OBJECT-TYPE
     SYNTAX          INTEGER {
                        enabled(1),
                        disabled(2),
						shutdown(3)
                     }
     MAX-ACCESS      read-only
     STATUS          current
     DESCRIPTION
           "This object indicates the administrative state of the module."
     DEFVAL { enabled }               
     ::= { cienaCesModuleEntry 7 }


 cienaCesModuleOperState   OBJECT-TYPE
     SYNTAX          INTEGER {
                        uninstalled(1),
                        unequipped(2),
                        init(3),
                        disabled(4),
                        enabled(5),
                        faulted(6),
                        hotswap(7),
			poweroff(8),
                        hitlessInit(9),
			fastReload(10),
			krnInit(11),
			unsupported(12),
			installing(13),
			failed(14),
			krnDisable(15),
			appFault(16),
			booting(17),
			powerdown(18)
			}
     MAX-ACCESS      read-only
     STATUS          current
     DESCRIPTION
           "This object indicates the operational state of the module."               
     ::= { cienaCesModuleEntry 8 }
 
 cienaCesModuleProtectionRole   OBJECT-TYPE
     SYNTAX          INTEGER {
                        none(1),
                        primary(2),
                        secondary(3)
                     }
     MAX-ACCESS      read-only
     STATUS          current
     DESCRIPTION
           "This object indicates the redundant administrative state of the module."     
     ::= { cienaCesModuleEntry 9 }
      
 cienaCesModuleStandbyStatus   OBJECT-TYPE
     SYNTAX          INTEGER {
                        none(0),
                        cold(1),
                        warm(2),
                        hot(3),
                        protected(4)
                     }
     MAX-ACCESS      read-only
     STATUS          current
     DESCRIPTION
           "This object indicates the standby status of the module."     
     ::= { cienaCesModuleEntry 10 }        
 
 cienaCesModuleLastRebootReason  OBJECT-TYPE
     SYNTAX          INTEGER {
                        unknown(1),
                        snmp(2),
                        pwrFail(3),
                        appLoad(4),
                        errorHandler(5),
                        watchdog(6),
                        upgrade(7),
                        cli(8),
                        resetButton(9),
                        failOver(10),
                        faultManager(11),
                        communicationFailure(12),
                        configurationRevert(13),
                        unprotectedFailure(14),
                        bootFailure(15),
                        softwareRevert(16),
                        processorWarmRestart(17),
                        coldRestart(18),
                        primaryRestart(19)
                     }
     MAX-ACCESS      read-only
     STATUS          current
     DESCRIPTION
           "This object indicates the last reboot reason of the module."     
     ::= { cienaCesModuleEntry 11 } 
     
 cienaCesModuleAdminPostState          OBJECT-TYPE
     SYNTAX          CienaGlobalState     
     MAX-ACCESS      read-only
     STATUS          current
     DESCRIPTION
           "This object sets the POST administrative state for the given module."               
     ::= { cienaCesModuleEntry 12 }
 
 cienaCesModuleOperPostState          OBJECT-TYPE
     SYNTAX          CienaGlobalState     
     MAX-ACCESS      read-only
     STATUS          current
     DESCRIPTION
           "This object indicates the POST operational state for the given module."               
     ::= { cienaCesModuleEntry 13}

 cienaCesModuleTrapState		OBJECT-TYPE
 	SYNTAX			CienaGlobalState
 	MAX-ACCESS		read-write
 	STATUS			current
 	DESCRIPTION
 		"This object indicates whether the device generates notifications for this module."
    DEFVAL { enabled }
 	::= { cienaCesModuleEntry 16 }       

 cienaCesModuleChassisNotifIndx          OBJECT-TYPE
     SYNTAX          Unsigned32 (1..1)
     MAX-ACCESS      accessible-for-notify
     STATUS          current
     DESCRIPTION
           "This object indicates the chassis index for the module used in trap definition."               
     ::= { cienaCesModuleEntry 17 }
     
 cienaCesModuleShelfNotifIndx          OBJECT-TYPE
     SYNTAX          Unsigned32 (0..992)
     MAX-ACCESS      accessible-for-notify
     STATUS          current
     DESCRIPTION
           "This object indicates the shelf index for the module used in trap definition."               
     ::= { cienaCesModuleEntry 18 }

 cienaCesModuleSlotNotifIndx          OBJECT-TYPE
     SYNTAX          Unsigned32 (1..38)	
     MAX-ACCESS      accessible-for-notify
     STATUS          current
     DESCRIPTION
           "This object indicates the slot index for the module used in trap definition."
     ::= { cienaCesModuleEntry 19 }

 cienaCesModuleSlotName   OBJECT-TYPE
     SYNTAX          DisplayString
     MAX-ACCESS      read-only
     STATUS          current
     DESCRIPTION
           "This object indicates the slot name that the module is installed in."               
     ::= { cienaCesModuleEntry 20 }  

 --
 --  The Module Description Table
 --

 cienaCesModuleDescriptionTable OBJECT-TYPE
     SYNTAX     SEQUENCE OF CienaCesModuleDescriptionEntry
     MAX-ACCESS not-accessible
     STATUS     current
     DESCRIPTION
            "The (conceptual) table listing the description of physical attributes of the modules."
    ::= { cienaCesModule 2 }

 cienaCesModuleDescriptionEntry OBJECT-TYPE
    SYNTAX     CienaCesModuleDescriptionEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the cienaCesModuleDescriptionTable."
    INDEX      { cienaCesModuleChassisIndx, cienaCesModuleShelfIndx, cienaCesModuleSlotIndx }
    ::= { cienaCesModuleDescriptionTable 1 }
        
 CienaCesModuleDescriptionEntry ::= SEQUENCE {
    cienaCesModuleDescriptionBoardName              DisplayString,
    cienaCesModuleDescriptionBoardPartNum           DisplayString,    
    cienaCesModuleDescriptionBoardSerialNum	    DisplayString,
    cienaCesModuleDescriptionBoardDesc              DisplayString,
    cienaCesModuleDescriptionHwVersion              DisplayString,
    cienaCesModuleDescriptionMfgDate                DisplayString,
    cienaCesModuleDescriptionBaseMac                MacAddress,   
    cienaCesModuleDescriptionUpTime                 TimeTicks,    
    cienaCesModuleDescriptionTotalNumPorts          Integer32
 }     
   
  cienaCesModuleDescriptionBoardName   OBJECT-TYPE
     SYNTAX          DisplayString
     MAX-ACCESS      read-only
     STATUS          current
     DESCRIPTION
           "This object indicates the module name."               
     ::= { cienaCesModuleDescriptionEntry 1 } 
  
  cienaCesModuleDescriptionBoardPartNum   OBJECT-TYPE
     SYNTAX             DisplayString
     MAX-ACCESS         read-only
     STATUS             current
     DESCRIPTION
        "This object indicates the board part number."  
      ::= { cienaCesModuleDescriptionEntry 2 }

   cienaCesModuleDescriptionBoardSerialNum   OBJECT-TYPE
     SYNTAX             DisplayString
     MAX-ACCESS         read-only
     STATUS             current
     DESCRIPTION
        "This object indicates the board serial number."  
      ::= { cienaCesModuleDescriptionEntry 3 }

  cienaCesModuleDescriptionBoardDesc   OBJECT-TYPE
     SYNTAX          DisplayString
     MAX-ACCESS      read-only
     STATUS          current
     DESCRIPTION
           "This object indicates the board description."               
     ::= { cienaCesModuleDescriptionEntry 4 }   
      
   cienaCesModuleDescriptionHwVersion   OBJECT-TYPE
     SYNTAX             DisplayString
     MAX-ACCESS         read-only
     STATUS             current
     DESCRIPTION
        "This object indicates the module hardware version."  
      ::= { cienaCesModuleDescriptionEntry 5 }

   cienaCesModuleDescriptionMfgDate   OBJECT-TYPE
     SYNTAX             DisplayString
     MAX-ACCESS         read-only
     STATUS             current
     DESCRIPTION
        "This object indicates the module manufacturing date."  
      ::= { cienaCesModuleDescriptionEntry 6 }

   cienaCesModuleDescriptionBaseMac   OBJECT-TYPE
     SYNTAX             MacAddress
     MAX-ACCESS         read-only
     STATUS             current
     DESCRIPTION
        "This object indicates the module base MAC address."  
      ::= { cienaCesModuleDescriptionEntry 7 }

   cienaCesModuleDescriptionUpTime   OBJECT-TYPE
     SYNTAX             TimeTicks
     MAX-ACCESS         read-only
     STATUS             current
     DESCRIPTION
        "This object indicates the module up time (in hundredths of a second) since the
              module was last re-initialized."  
      ::= { cienaCesModuleDescriptionEntry 8 }
  
    cienaCesModuleDescriptionTotalNumPorts  OBJECT-TYPE
     SYNTAX       Integer32
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
        "This object indicates the number of ports on this module." 
     ::= { cienaCesModuleDescriptionEntry 9 }
  
 --
 --  The Module IDP Table
 --

 cienaCesModuleIDPTable OBJECT-TYPE
     SYNTAX     SEQUENCE OF CienaCesModuleIDPEntry
     MAX-ACCESS not-accessible
     STATUS     current
     DESCRIPTION
            "The (conceptual) table listing the description of ID Prom contents of the modules."
    ::= { cienaCesModule 8 }

 cienaCesModuleIDPEntry OBJECT-TYPE
    SYNTAX     CienaCesModuleIDPEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the cienaCesModuleIDPTable."
    INDEX      { cienaCesModuleChassisIndx, cienaCesModuleShelfIndx, cienaCesModuleSlotIndx }
    ::= { cienaCesModuleIDPTable 1 }
        
 CienaCesModuleIDPEntry ::= SEQUENCE {
    cienaCesModuleIDPEthBaseMac     		MacAddress,
    cienaCesModuleIDPEthBaseMacRange         	Integer32,    
    cienaCesModuleIDPModuleSerialNumber		DisplayString,
    cienaCesModuleIDPModelPartNumber            DisplayString,
    cienaCesModuleIDPModelRevision              DisplayString,
    cienaCesModuleIDPProductID              	DisplayString,
    cienaCesModuleIDPMfgDate                	DisplayString,
    cienaCesModuleIDPCleiCode                	DisplayString,   
    cienaCesModuleIDPBarcode                    DisplayString,    
    cienaCesModuleIDPSWCompat          		Integer32,
    cienaCesModuleIDPFTC          		Integer32
 }     
   
  cienaCesModuleIDPEthBaseMac   OBJECT-TYPE
     SYNTAX          	MacAddress
     MAX-ACCESS      	read-only
     STATUS          	current
     DESCRIPTION
           "This object indicates the module Ethernet Base MAC address stored in the module IDP."               
     ::= { cienaCesModuleIDPEntry 1 } 
  
  cienaCesModuleIDPEthBaseMacRange  OBJECT-TYPE
     SYNTAX             Integer32
     MAX-ACCESS         read-only
     STATUS             current
     DESCRIPTION
        "This object indicates the Ethernet MAC address range stored in the module IDP."  
      ::= { cienaCesModuleIDPEntry 2 }

   cienaCesModuleIDPModuleSerialNumber   OBJECT-TYPE
     SYNTAX             DisplayString
     MAX-ACCESS         read-only
     STATUS             current
     DESCRIPTION
        "This object indicates the Module Serial Number stored in the module IDP."
      ::= { cienaCesModuleIDPEntry 3 }

  cienaCesModuleIDPModelPartNumber   OBJECT-TYPE
     SYNTAX          DisplayString
     MAX-ACCESS      read-only
     STATUS          current
     DESCRIPTION
        "This object indicates the Model Part Number stored in the module IDP."
      ::= { cienaCesModuleIDPEntry 4 }   
      
   cienaCesModuleIDPModelRevision   OBJECT-TYPE
     SYNTAX             DisplayString
     MAX-ACCESS         read-only
     STATUS             current
     DESCRIPTION
        "This object indicates the Model Revision stored in the module IDP."
      ::= { cienaCesModuleIDPEntry 5 }

   cienaCesModuleIDPProductID   OBJECT-TYPE
     SYNTAX             DisplayString
     MAX-ACCESS         read-only
     STATUS             current
     DESCRIPTION
        "This object indicates the Module Product ID stored in the module IDP."  
      ::= { cienaCesModuleIDPEntry 6 }

   cienaCesModuleIDPMfgDate   OBJECT-TYPE
     SYNTAX             DisplayString
     MAX-ACCESS         read-only
     STATUS             current
     DESCRIPTION
        "This object indicates the Manufactured Date stored in the module IDP."
      ::= { cienaCesModuleIDPEntry 7 }

   cienaCesModuleIDPCleiCode   OBJECT-TYPE
     SYNTAX             DisplayString
     MAX-ACCESS         read-only
     STATUS             current
     DESCRIPTION
        "This object indicates the CLEI Code stored in the module IDP."  
      ::= { cienaCesModuleIDPEntry 8 }
  
    cienaCesModuleIDPBarcode  OBJECT-TYPE
     SYNTAX       	DisplayString
     MAX-ACCESS   	read-only
     STATUS       	current
     DESCRIPTION
        "This object indicates the Barcode stored in the module IDP." 
     ::= { cienaCesModuleIDPEntry 9 }
       
    cienaCesModuleIDPSWCompat  OBJECT-TYPE
     SYNTAX       	Integer32
     MAX-ACCESS   	read-only
     STATUS       	current
     DESCRIPTION
        "This object indicates the Software Compatibility Number stored in the module IDP." 
     ::= { cienaCesModuleIDPEntry 10 }
     
    cienaCesModuleIDPFTC  OBJECT-TYPE
     SYNTAX       	Integer32
     MAX-ACCESS   	read-only
     STATUS       	current
     DESCRIPTION
        "This object indicates the Functional Test Count stored in the module IDP." 
     ::= { cienaCesModuleIDPEntry 11 }

  
 
 --
 -- Module Temperature sensors
 --
 cienaCesModuleTempSensorTable OBJECT-TYPE
     SYNTAX     SEQUENCE OF CienaCesModuleTempSensorEntry
     MAX-ACCESS not-accessible
     STATUS     current
     DESCRIPTION
            "The (conceptual) table listing the temperature sensors of the modules."
    ::= { cienaCesModule 3 }

 cienaCesModuleTempSensorEntry OBJECT-TYPE
    SYNTAX     CienaCesModuleTempSensorEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the cienaCesModuleTempSensorTable."
    INDEX      { cienaCesModuleChassisIndx, cienaCesModuleShelfIndx, cienaCesModuleSlotIndx, cienaCesModuleSensorIndx }
    ::= { cienaCesModuleTempSensorTable 1 }
        
 CienaCesModuleTempSensorEntry ::= SEQUENCE {           
   cienaCesModuleSensorIndx                Integer32,
   cienaCesModuleSensorDescription         DisplayString,
   cienaCesModuleSensorCurrentTemp         Integer32,
   cienaCesModuleSensorHighTemp            Integer32,
   cienaCesModuleSensorLowTemp             Integer32,
   cienaCesModuleSensorHighTempThreshold   Integer32,
   cienaCesModuleSensorLowTempThreshold    Integer32,
   cienaCesModuleSensorNotifIndx                Integer32

 }                                          
 
 cienaCesModuleSensorIndx   OBJECT-TYPE
     SYNTAX             Integer32 (1..65535)
     MAX-ACCESS         not-accessible
     STATUS             current
     DESCRIPTION
        "This object indicates the unique index in the table along with cienaCesModuleIndx."  
      ::= { cienaCesModuleTempSensorEntry 1 }
      
 cienaCesModuleSensorDescription   OBJECT-TYPE
     SYNTAX             DisplayString
     MAX-ACCESS         read-only
     STATUS             current
     DESCRIPTION
        "This object indicates the sensor description."  
      ::= { cienaCesModuleTempSensorEntry 2 }
 
 cienaCesModuleSensorCurrentTemp   OBJECT-TYPE
     SYNTAX             Integer32
     MAX-ACCESS         read-only
     STATUS             current
     DESCRIPTION
        "This object indicates the current temperature of the module."  
      ::= { cienaCesModuleTempSensorEntry 3 }
 
 cienaCesModuleSensorHighTemp   OBJECT-TYPE
     SYNTAX             Integer32
     MAX-ACCESS         read-only
     STATUS             current
     DESCRIPTION
        "This object indicates the highest temperature this module 
         has reached since the last reboot."  
      ::= { cienaCesModuleTempSensorEntry 4 }
      
 cienaCesModuleSensorLowTemp   OBJECT-TYPE
     SYNTAX             Integer32
     MAX-ACCESS         read-only
     STATUS             current
     DESCRIPTION
        "This object indicates the lowest temperature this module 
         has reached since the last reboot"  
      ::= { cienaCesModuleTempSensorEntry 5 } 
  
 cienaCesModuleSensorHighTempThreshold   OBJECT-TYPE
     SYNTAX             Integer32 (0..60)
     MAX-ACCESS         read-only
     STATUS             current
     DESCRIPTION
        "This object indicates the high threshold for this module temperature."  
      ::= { cienaCesModuleTempSensorEntry 6 } 
      
 cienaCesModuleSensorLowTempThreshold   OBJECT-TYPE
     SYNTAX             Integer32 (0..60)
     MAX-ACCESS         read-only
     STATUS             current
     DESCRIPTION
        "This object indicates the low threshold for this module temperature."    
      ::= { cienaCesModuleTempSensorEntry 7 } 
 
  cienaCesModuleSensorNotifIndx   OBJECT-TYPE
     SYNTAX             Integer32 (1..65535)
     MAX-ACCESS         accessible-for-notify
     STATUS             current
     DESCRIPTION
        "This object indicates the unique index in the table used for trap definition."  
      ::= { cienaCesModuleTempSensorEntry 8 }
       
 --
 -- Module Software package
 --                             
 
 cienaCesGlobalSwState OBJECT-TYPE
     SYNTAX       INTEGER {
     			    	idle(1),
     			    	downloading(2),
     			    	installing(3),
     			    	activating(4),
     			    	validating(5),
     			    	reverting(6),
     			    	running(7)
     			}
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
             "The global software state of the system."
     ::= { cienaCesSwModule 1 }

 cienaCesModuleSwTable OBJECT-TYPE
     SYNTAX     SEQUENCE OF CienaCesModuleSwEntry
     MAX-ACCESS not-accessible
     STATUS     current
     DESCRIPTION
            "The (conceptual) table listing the software package attributes on the modules."
    ::= { cienaCesSwModule 2 }

 cienaCesModuleSwEntry OBJECT-TYPE
    SYNTAX     CienaCesModuleSwEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the cienaCesModuleSwTable. "
    INDEX      { cienaCesModuleChassisIndx, cienaCesModuleShelfIndx, cienaCesModuleSlotIndx }
    ::= { cienaCesModuleSwTable 1 }
        

 CienaCesModuleSwEntry ::=  SEQUENCE { 
     cienaCesModuleSwState             				SwModuleState,  
     cienaCesModuleSwRunningRelease	   				DisplayString,
     cienaCesModuleSwRunningReleasePartition  		Unsigned32,
     cienaCesModuleSwReleasePartition0Pkg    		DisplayString, 
     cienaCesModuleSwReleasePartition0PkgStatus     SwPkgStatus, 
     cienaCesModuleSwReleasePartition1Pkg    		DisplayString, 
     cienaCesModuleSwReleasePartition1PkgStatus     SwPkgStatus, 
     cienaCesModuleSwReleasePartition2Pkg    		DisplayString, 
     cienaCesModuleSwReleasePartition2PkgStatus     SwPkgStatus, 
     cienaCesModuleSwBank0KernelVersion				DisplayString, 
     cienaCesModuleSwBank0KernelStatus			    SwPkgStatus,
     cienaCesModuleSwBank1KernelVersion		        DisplayString,
     cienaCesModuleSwBank1KernelStatus			    SwPkgStatus,
     cienaCesModuleSwBank0UbootVersion       		DisplayString,
     cienaCesModuleSwBank0UbootStatus			    SwPkgStatus,
     cienaCesModuleSwBank1UbootVersion       		DisplayString,
     cienaCesModuleSwBank1UbootStatus			    SwPkgStatus,
     cienaCesModuleSwUbootGoldVersion       		DisplayString,
     cienaCesModuleSwUbootGoldStatus			    SwPkgStatus,
     cienaCesModuleSwMIBVer            				DisplayString
 }
 
 cienaCesModuleSwState OBJECT-TYPE
     SYNTAX       SwModuleState
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
             "The software state on the module."
     ::= { cienaCesModuleSwEntry 1 }

 cienaCesModuleSwRunningRelease OBJECT-TYPE
     SYNTAX       DisplayString(SIZE(0..256))
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
             "Software package version that is currently running on the module."
     ::= { cienaCesModuleSwEntry 2 }
     
 cienaCesModuleSwRunningReleasePartition	OBJECT-TYPE
 	 SYNTAX				Unsigned32
 	 MAX-ACCESS			read-only
 	 STATUS				current
 	 DESCRIPTION
 	 		"Release partition where the current running release is installed."
     ::= { cienaCesModuleSwEntry 3 }

 cienaCesModuleSwReleasePartition0Pkg OBJECT-TYPE
     SYNTAX       DisplayString(SIZE(0..256))
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
             "Release partition 0 software package version."
     ::= { cienaCesModuleSwEntry 4 }

 cienaCesModuleSwReleasePartition0PkgStatus OBJECT-TYPE
     SYNTAX       SwPkgStatus
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
             "Release partition 0 software package status."
     ::= { cienaCesModuleSwEntry 5 }  
     
 cienaCesModuleSwReleasePartition1Pkg OBJECT-TYPE
     SYNTAX       DisplayString(SIZE(0..256))
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
             "Release partition 1 software package version."
     ::= { cienaCesModuleSwEntry 6 }

 cienaCesModuleSwReleasePartition1PkgStatus OBJECT-TYPE
     SYNTAX       SwPkgStatus
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
             "Release partition 1 software package status."
     ::= { cienaCesModuleSwEntry 7 }     
     
 cienaCesModuleSwReleasePartition2Pkg OBJECT-TYPE
     SYNTAX       DisplayString(SIZE(0..256))
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
             "Release partition 2 software package version."
     ::= { cienaCesModuleSwEntry 8 }

 cienaCesModuleSwReleasePartition2PkgStatus OBJECT-TYPE
     SYNTAX       SwPkgStatus
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
             "Release partition 2 software package status."
     ::= { cienaCesModuleSwEntry 9 }

 cienaCesModuleSwBank0KernelVersion OBJECT-TYPE
     SYNTAX       DisplayString(SIZE(0..256))
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
             "Bank0 kernel version."
     ::= { cienaCesModuleSwEntry 10 }

 cienaCesModuleSwBank0KernelStatus OBJECT-TYPE
     SYNTAX       SwPkgStatus
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
             "Bank0 kernel software status."
     ::= { cienaCesModuleSwEntry 11 }

 cienaCesModuleSwBank1KernelVersion OBJECT-TYPE
     SYNTAX       DisplayString(SIZE(0..256))
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
             "Bank1 kernel version."
     ::= { cienaCesModuleSwEntry 12 }

 cienaCesModuleSwBank1KernelStatus OBJECT-TYPE
     SYNTAX       SwPkgStatus
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
             "Bank1 kernel status."
     ::= { cienaCesModuleSwEntry 13 }

 cienaCesModuleSwBank0UbootVersion OBJECT-TYPE
     SYNTAX       DisplayString(SIZE(0..256))
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
             "Bank0 U-boot version."
     ::= { cienaCesModuleSwEntry 14 }

 cienaCesModuleSwBank0UbootStatus OBJECT-TYPE
     SYNTAX       SwPkgStatus
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
             "Bank0 U-boot status. "
     ::= { cienaCesModuleSwEntry 15 }

 cienaCesModuleSwBank1UbootVersion OBJECT-TYPE
     SYNTAX       DisplayString(SIZE(0..256))
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
             "Bank1 U-boot version."
     ::= { cienaCesModuleSwEntry 16 }

 cienaCesModuleSwBank1UbootStatus OBJECT-TYPE
     SYNTAX       SwPkgStatus
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
             "Bank0 U-boot status. "
     ::= { cienaCesModuleSwEntry 17 } 
     
 cienaCesModuleSwUbootGoldVersion OBJECT-TYPE
     SYNTAX       DisplayString(SIZE(0..256))
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
             "U-boot Gold version."
     ::= { cienaCesModuleSwEntry 18 }

 cienaCesModuleSwUbootGoldStatus OBJECT-TYPE
     SYNTAX       SwPkgStatus
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
             "U-boot Gold status. "
     ::= { cienaCesModuleSwEntry 19 }

 cienaCesModuleSwMIBVer OBJECT-TYPE
     SYNTAX       DisplayString(SIZE(0..128))
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
            "This MIB object shows the MIB version currently supported."
     ::= { cienaCesModuleSwEntry 20 }
  
   
 --
 -- Module POST errors
 --
 cienaCesModulePOSTErrorTable OBJECT-TYPE
     SYNTAX     SEQUENCE OF CienaCesModulePOSTErrorEntry
     MAX-ACCESS not-accessible
     STATUS     current
     DESCRIPTION
            "The (conceptual) table for viewing POST error on the modules."
    ::= { cienaCesModule 5 }

 cienaCesModulePOSTErrorEntry OBJECT-TYPE
    SYNTAX     CienaCesModulePOSTErrorEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the cienaCesModulePOSTErrorResultsTable. "
    INDEX      { cienaCesModuleChassisIndx, cienaCesModuleShelfIndx, cienaCesModuleSlotIndx,
    			cienaCesModulePOSTErrorIndex }
    ::= { cienaCesModulePOSTErrorTable 1 }
        

 CienaCesModulePOSTErrorEntry ::=  SEQUENCE { 
     cienaCesModulePOSTErrorIndex        INTEGER,  
     cienaCesModulePOSTErrorDescription	 OCTET STRING,
     cienaCesModulePOSTErrorSeverity     INTEGER,
     cienaCesModulePOSTErrorScope		 INTEGER,
     cienaCesModulePOSTScopeIndex        INTEGER
    }

 cienaCesModulePOSTErrorIndex				OBJECT-TYPE
 	 SYNTAX			 INTEGER 
 	 MAX-ACCESS		 not-accessible
 	 STATUS			 current
 	 DESCRIPTION
 	 	"Index of the POST error for the module."
 	 ::= { cienaCesModulePOSTErrorEntry 1 }	
 	 		
 cienaCesModulePOSTErrorDescription			OBJECT-TYPE
     SYNTAX          OCTET STRING 
     MAX-ACCESS      read-only
     STATUS          current
     DESCRIPTION
     	"A description of the module POST error."
 	::= { cienaCesModulePOSTErrorEntry	2 } 
 	
 cienaCesModulePOSTErrorSeverity           OBJECT-TYPE
     SYNTAX     INTEGER {
     			unknown(0),
				fatal(1),
				severe(2),
				warning(3)
				}
     MAX-ACCESS      read-only
     STATUS          current
     DESCRIPTION
                "Severity of the POST error for the module." 
     ::= { cienaCesModulePOSTErrorEntry	3 }  
  
   cienaCesModulePOSTErrorScope           OBJECT-TYPE
     SYNTAX    INTEGER {    
     			unknown(0),
				chassis(1),
				blade(2),
				port(3)
				}
     MAX-ACCESS      read-only
     STATUS          current
     DESCRIPTION
                "Scope of the POST error for the module."
     ::= { cienaCesModulePOSTErrorEntry 4 }
   
   cienaCesModulePOSTScopeIndex 		OBJECT-TYPE
   SYNTAX	       INTEGER 
   MAX-ACCESS      read-only
   STATUS          current
   DESCRIPTION
                " When scope is a port this object identifies the port number."
     ::= { cienaCesModulePOSTErrorEntry 5 }

 --
 -- Module Notification attributes
 --                               
 
  cienaCesModuleSystemProtectionMode		OBJECT-TYPE
 	SYNTAX		INTEGER	{
 						unprotected(1),
                        cold(2),
                        warm(3),
                        hot(4)
 					}
 	MAX-ACCESS		accessible-for-notify
 	STATUS			current
 	DESCRIPTION
			"This object indicates the protection mode of the system." 
	::= { cienaCesModuleNotifAttrs	1}  

  cienaCesModuleSwitchOverReason			OBJECT-TYPE
 	SYNTAX		INTEGER	{
 					coldFailOver(1),
 					coldSwitchOver(2),
 					hotSwitchOver(3),
 					hotFailOver(4)
 					}
 	MAX-ACCESS		accessible-for-notify
 	STATUS			current
 	DESCRIPTION
 		"This object indicates the reason the SwitchOver happened. The following combinations 
 		determine the value of this object:          
 		CTM failure	- Deprov mode - Cold FailOver
 		User Initiated - Deprov Mode - Cold SwitchOver
 		CTM failure	- Audit mode - Hot FailOver
 		User initiated - Audit mode - Hot SwitchOver.
 		"
 	::= { cienaCesModuleNotifAttrs	2}

 cienaCesModuleNotifTable OBJECT-TYPE
     SYNTAX     SEQUENCE OF CienaCesModuleNotifEntry
     MAX-ACCESS not-accessible
     STATUS     current
     DESCRIPTION
            "The (conceptual) table to define the notification variable bindings."
    ::= { cienaCesModuleNotifAttrs 3 }

 cienaCesModuleNotifEntry OBJECT-TYPE
    SYNTAX     CienaCesModuleNotifEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the cienaCesModuleNotifEntryTable. "
    INDEX      { cienaCesModuleChassisIndx, cienaCesModuleShelfIndx, cienaCesModuleSlotIndx }
    ::= { cienaCesModuleNotifTable 1 }
        

 CienaCesModuleNotifEntry ::=  SEQUENCE { 
    cienaCesModuleHealthCategory        TceHealthCategory,
    cienaCesModuleHealthSubCategory     Unsigned32,
    cienaCesModuleHealthStatus          TceHealthStatus,
    cienaCesModuleHealthStatusLast      TceHealthStatus,
    cienaCesModuleHealthOriginType		HealthOriginType,
    cienaCesModuleHealthOriginName		DisplayString,
    cienaCesModuleHealthOriginUnitId	Unsigned32
}
  cienaCesModuleHealthCategory  OBJECT-TYPE
     SYNTAX           TceHealthCategory
     MAX-ACCESS       accessible-for-notify
     STATUS           current
     DESCRIPTION
	     "This object indicates the health category that the Health Manager 
          monitors on the module."      
     ::= { cienaCesModuleNotifEntry 1 } 
     
  cienaCesModuleHealthSubCategory  OBJECT-TYPE
     SYNTAX           Unsigned32
     MAX-ACCESS       accessible-for-notify
     STATUS           current
     DESCRIPTION
	     "This object indicates the health sub category that the Health Manager 
         monitors on the module."      
     ::= { cienaCesModuleNotifEntry 2 } 
     
  cienaCesModuleHealthStatus  OBJECT-TYPE
     SYNTAX           TceHealthStatus
     MAX-ACCESS       accessible-for-notify
     STATUS           current
     DESCRIPTION
	     "This object indicates the current health status of health category and
          its sub category being monitored on the module."      
     ::= { cienaCesModuleNotifEntry 3 } 
     
  cienaCesModuleHealthStatusLast  OBJECT-TYPE
     SYNTAX           TceHealthStatus
     MAX-ACCESS       accessible-for-notify
     STATUS           current
     DESCRIPTION
	     "This object indicates the last known health status of health category and
          its sub category being monitored on the module."      
          ::= { cienaCesModuleNotifEntry 4 } 

  cienaCesModuleHealthOriginType  OBJECT-TYPE
     SYNTAX           HealthOriginType
     MAX-ACCESS       accessible-for-notify
     STATUS           current
     DESCRIPTION
	     "This object indicates the origin of the health status notification."      
          ::= { cienaCesModuleNotifEntry 5 } 

  cienaCesModuleHealthOriginName  OBJECT-TYPE
     SYNTAX           DisplayString(SIZE(0..10))
     MAX-ACCESS       accessible-for-notify
     STATUS           current
     DESCRIPTION
	     "This object indicates the origin name of the health status notification."      
          ::= { cienaCesModuleNotifEntry 6 } 

  cienaCesModuleHealthOriginUnitId  OBJECT-TYPE
     SYNTAX           Unsigned32
     MAX-ACCESS       accessible-for-notify
     STATUS           current
     DESCRIPTION
	     "This object indicates the origin id of the health notification."      
     ::= { cienaCesModuleNotifEntry 7 } 
	
--
-- CienaCesModuleResourceHealthEntry
--
  cienaCesModuleResourceHealthTable OBJECT-TYPE
        SYNTAX          SEQUENCE OF CienaCesModuleResourceHealthEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "Table listing the health information of dataplane resources."
    ::= { cienaCesModule 6 }

 cienaCesModuleResourceHealthEntry OBJECT-TYPE
        SYNTAX          CienaCesModuleResourceHealthEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "An entry in the cienaCesModuleResourceHealthTable."
        INDEX {  cienaCesModuleResourceHealthSubCategory,
        	 cienaCesModuleChassisIndx,
        	 cienaCesModuleShelfIndx,
        	 cienaCesModuleSlotIndx,
        	 cienaCesModuleResourceDeviceIndx }
        ::= { cienaCesModuleResourceHealthTable 1 }
        
  CienaCesModuleResourceHealthEntry ::= SEQUENCE {  
        cienaCesModuleResourceHealthSubCategory              INTEGER,      
        cienaCesModuleResourceDeviceIndx                     Unsigned32,
        cienaCesModuleResourceHealthState                    TceHealthStatus,
        cienaCesModuleResourceHealthCurrMeasurement          Unsigned32,
        cienaCesModuleResourceHealthMaxMeasurement           Unsigned32,
        cienaCesModuleResourceHealthMaxThreshold             Unsigned32
 } 
  cienaCesModuleResourceHealthSubCategory	OBJECT-TYPE
 		SYNTAX		INTEGER	{           
 							 none(0),  
   							 subPort(1),
   							 qosFlow(2),
   							 accessFlow(3),
							 queueGroupInstance(4),
							 schedulerInstance(5),
							 pbtTransit(6),
							 pltfmTokenBucket(7),
							 pltfmEgressTunnel(8),
							 pltfmVirtTcamEntries(9),
							 pltfmAclTcamEntries(10),
							 pltfmVOQ(11),
							 pltfmCLScheduler(12),
							 pltfmFQScheduler(13),
							 pltfmEgressShapingCIR(14),
							 pltfmBscp(15),
							 pltfmHighRateTokenBucket(16),
							 pltfmLowRateTokenBucket(17),
							 pltfmParentMeter(18),
							 pltfmChildMeter(19),
							 pltfmL2UserTypes(20),
							 logicalInterfaces(21),
							 pltfmLmPowerBudget(22),
							 pltfmPpIngressL2Xform(23),
							 pltfmPpEgressL2Xform(24),
							 pltfmPpInternalTcam(25),
							 pltfmNpMaintPoint(26),
							 pltfmNpMaintPointSession(27),
							 pltfmNpFastTimer300Hz(28),
							 pltfmNpFastTimer10msec(29),
							 pltfmNpFastTimer100msec(30),
							 pltfmNpFastTimer1sec(31),
							 pltfmNpSlowTimer(32),
							 pltfmNpWatchdogTimer(33),
							 pltfmNpProtectionGroup(34)
 }

 		MAX-ACCESS	not-accessible
 		STATUS		current
 		DESCRIPTION
 			"The sub-category of the dataplane resource being monitored.
 			- 'none' is an enumeration placeholder."
 		::= { cienaCesModuleResourceHealthEntry 1}

  cienaCesModuleResourceDeviceIndx			OBJECT-TYPE
 		SYNTAX		Unsigned32
 		MAX-ACCESS	not-accessible
 		STATUS		current
 		DESCRIPTION
 			"Index of the device being monitored."
 		::= { cienaCesModuleResourceHealthEntry 2}
 
 cienaCesModuleResourceHealthState            OBJECT-TYPE
        SYNTAX         TceHealthStatus                                                                            
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "Health state of the dataplane resource being monitored."
        ::= { cienaCesModuleResourceHealthEntry 3}
 
  cienaCesModuleResourceHealthCurrMeasurement OBJECT-TYPE 
        SYNTAX         Unsigned32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "Current value of the dataplane resource being monitored."
        ::= { cienaCesModuleResourceHealthEntry 4 }
  
  cienaCesModuleResourceHealthMaxMeasurement OBJECT-TYPE
        SYNTAX         Unsigned32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The maximum recorded value of the dataplane resource being monitored."
        ::= { cienaCesModuleResourceHealthEntry 5 }
   
    cienaCesModuleResourceHealthMaxThreshold OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The maximum possible value for the dataplane resource being monitored."
        ::= { cienaCesModuleResourceHealthEntry 6 }

 --
 -- Notification 
 --    

 cienaCesModuleStateChangeNotification  NOTIFICATION-TYPE
        OBJECTS      {  
        			 	cienaGlobalSeverity, 
        			 	cienaGlobalMacAddress,
        			 	cienaCesModuleChassisNotifIndx,
        			 	cienaCesModuleShelfNotifIndx,
        			 	cienaCesModuleSlotNotifIndx,
						cienaCesModuleAdminState,
                        cienaCesModuleOperState
         }
   STATUS      current
   DESCRIPTION
      "A cienaCesModuleStateChange notification is sent when the operational
       state of the module is changed.
       To enable the device to send this notification:
        - cienaCesModuleAllModulesTrapState needs to be set to enabled.  
        - cienaCesModuleTrapState for the module needs to be set to enabled.
       The above values are set to enabled by default. Variable bindings include: 
       cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, 
       cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, 
       cienaCesModuleAdminState, and cienaCesModuleOperState."
   ::= { cienaCesModuleMIBNotifications 1 }   
  
 cienaCesModuleHealthStatusUnknownNotification NOTIFICATION-TYPE
	OBJECTS	{  
     		  cienaGlobalSeverity,
     		  cienaGlobalMacAddress,
 			  cienaCesModuleChassisNotifIndx,
        	  cienaCesModuleShelfNotifIndx,
        	  cienaCesModuleSlotNotifIndx, 
        	  cienaCesModuleHealthOriginType,
        	  cienaCesModuleHealthOriginName,
        	  cienaCesModuleHealthOriginUnitId,
              cienaCesModuleHealthCategory,
              cienaCesModuleHealthSubCategory,
              cienaCesModuleHealthStatus,
              cienaCesModuleHealthStatusLast
            }
	STATUS	current
	DESCRIPTION
		"This notification is sent whenever the Health Manager detects a status change to unknown.
       To enable the device to send this notification:
        - cienaCesModuleAllModulesTrapState needs to be set to enabled.  
        - cienaCesModuleTrapState for the module needs to be set to enabled.    
        - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled.
       The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, 
       cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, 
       cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, 
       cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, 
       cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast."
	::= { cienaCesModuleMIBNotifications 2 }

 cienaCesModuleHealthStatusWarningNotification NOTIFICATION-TYPE
	OBJECTS	{  
     		  cienaGlobalSeverity,
     		  cienaGlobalMacAddress,
 			  cienaCesModuleChassisNotifIndx,
        	  cienaCesModuleShelfNotifIndx,
        	  cienaCesModuleSlotNotifIndx,
        	  cienaCesModuleHealthOriginType,
        	  cienaCesModuleHealthOriginName,
        	  cienaCesModuleHealthOriginUnitId,
              cienaCesModuleHealthCategory,
              cienaCesModuleHealthSubCategory,
              cienaCesModuleHealthStatus,
              cienaCesModuleHealthStatusLast
            }
	STATUS	current
	DESCRIPTION
		"This notification is sent whenever the Health Manager detects a status change to warning.
       To enable the device to send this notification:
        - cienaCesModuleAllModulesTrapState needs to be set to enabled.  
        - cienaCesModuleTrapState for the module needs to be set to enabled.    
        - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled.
       The above values are set to enabled by default. Variable bindings include: 
       cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, 
       cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, 
       cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, 
       cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, 
       cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and 
       cienaCesModuleHealthStatusLast."
	::= { cienaCesModuleMIBNotifications 3 }

 cienaCesModuleHealthStatusFaultedNotification NOTIFICATION-TYPE
	OBJECTS	{  
     		  cienaGlobalSeverity,
     		  cienaGlobalMacAddress,
 			  cienaCesModuleChassisNotifIndx,
        	  cienaCesModuleShelfNotifIndx,
        	  cienaCesModuleSlotNotifIndx,
        	  cienaCesModuleHealthOriginType,
        	  cienaCesModuleHealthOriginName,
        	  cienaCesModuleHealthOriginUnitId,
              cienaCesModuleHealthCategory,
              cienaCesModuleHealthSubCategory,
              cienaCesModuleHealthStatus,
              cienaCesModuleHealthStatusLast
            }
	STATUS	current
	DESCRIPTION
		"This notification is sent whenever the Health Manager detects a status change to faulted.
       To enable the device to send this notification:
        - cienaCesModuleAllModulesTrapState needs to be set to enabled. 
        - cienaCesModuleTrapState for the module needs to be set to enabled.   
        - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled
       The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, 
       cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, 
       cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, 
       cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, 
       cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast."
	::= { cienaCesModuleMIBNotifications 4 }

 cienaCesModuleHealthStatusDegradedNotification NOTIFICATION-TYPE
	OBJECTS	{  
     		  cienaGlobalSeverity,
     		  cienaGlobalMacAddress,
 			  cienaCesModuleChassisNotifIndx,
        	  cienaCesModuleShelfNotifIndx,
        	  cienaCesModuleSlotNotifIndx,
        	  cienaCesModuleHealthOriginType,
        	  cienaCesModuleHealthOriginName,
        	  cienaCesModuleHealthOriginUnitId,
              cienaCesModuleHealthCategory,
              cienaCesModuleHealthSubCategory,
              cienaCesModuleHealthStatus,
              cienaCesModuleHealthStatusLast
            }
	STATUS	current
	DESCRIPTION
		"This notification is sent whenever the Health Manager detects a status change to degraded.
       To enable the device to send this notification:
        - cienaCesModuleAllModulesTrapState needs to be set to enabled. 
        - cienaCesModuleTrapState for the module needs to be set to enabled.   
        - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled
       The above values are set to enabled by default. Variable bindings include: 
       cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, 
       cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, 
       cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, 
       cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, 
       cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, 
       and cienaCesModuleHealthStatusLast."
	::= { cienaCesModuleMIBNotifications 5 }

 cienaCesModuleHealthStatusGoodNotification NOTIFICATION-TYPE
	OBJECTS	{  
     		  cienaGlobalSeverity,
     		  cienaGlobalMacAddress,
 			  cienaCesModuleChassisNotifIndx,
        	  cienaCesModuleShelfNotifIndx,
        	  cienaCesModuleSlotNotifIndx,
        	  cienaCesModuleHealthOriginType,
        	  cienaCesModuleHealthOriginName, 
        	  cienaCesModuleHealthOriginUnitId,
              cienaCesModuleHealthCategory,
              cienaCesModuleHealthSubCategory,
              cienaCesModuleHealthStatus,
              cienaCesModuleHealthStatusLast
            }
	STATUS	current
	DESCRIPTION
		"This notification is sent whenever the Health Manager detects a status change to normal.
       To enable the device to send this notification:
        - cienaCesModuleAllModulesTrapState needs to be set to enabled. 
        - cienaCesModuleTrapState for the module needs to be set to enabled.   
        - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled
       The above values are set to enabled by default. Variable bindings include: 
       cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, 
       cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, 
       cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, 
       cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, 
       cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and 
       cienaCesModuleHealthStatusLast."
	::= { cienaCesModuleMIBNotifications 6 }
 
 cienaCesModuleSensorHighTempNotification NOTIFICATION-TYPE
	OBJECTS	{    
       			 cienaGlobalSeverity,  
       			 cienaGlobalMacAddress,   
    			 cienaCesModuleChassisNotifIndx,
        		 cienaCesModuleShelfNotifIndx,
        		 cienaCesModuleSlotNotifIndx,
       			 cienaCesModuleSensorNotifIndx,
                 cienaCesModuleSensorDescription,
                 cienaCesModuleSensorCurrentTemp,
                 cienaCesModuleSensorHighTempThreshold                  
		    }
	STATUS	current
	DESCRIPTION
		"This notification is sent when the cienaCesModuleSensor temperature exceeds the high
		temperature threshold for the module.
       To enable the device to send this notification:
        - cienaCesModuleAllModulesTrapState needs to be set to enabled. 
        - cienaCesModuleSensorTrapState needs to be set to enabled.   
       The above values are set to enabled by default. Variable bindings include: 
       cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, 
       cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, 
       cienaCesModuleSensorNotifIndx, cienaCesModuleSensorDescription, 
       cienaCesModuleSensorCurrentTemp, and cienaCesModuleSensorHighTempThreshold."
	::= { cienaCesModuleMIBNotifications 7 }
 
  cienaCesModuleSensorNormalTempNotification NOTIFICATION-TYPE
	OBJECTS	{ 
       			 cienaGlobalSeverity,  
       			 cienaGlobalMacAddress,
    			 cienaCesModuleChassisNotifIndx,
        		 cienaCesModuleShelfNotifIndx,
        		 cienaCesModuleSlotNotifIndx,
       			 cienaCesModuleSensorNotifIndx,
	             cienaCesModuleSensorDescription,
    	         cienaCesModuleSensorCurrentTemp,
        	     cienaCesModuleSensorLowTemp,
            	 cienaCesModuleSensorHighTemp                  
			}
	STATUS	current
	DESCRIPTION
		"This notification is sent if the cienaCesModule temperature changes
         from previously reported high or low temperature exceeding thresholds to normal temperature.
       To enable the device to send this notification:
        - cienaCesModuleAllModulesTrapState needs to be set to enabled. 
        - cienaCesModuleSensorTrapState needs to be set to enabled.   
       The above values are set to enabled by default. Variable bindings include: 
       cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, 
       cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, 
       cienaCesModuleSensorNotifIndx, cienaCesModuleSensorDescription, 
       cienaCesModuleSensorCurrentTemp, cienaCesModuleSensorLowTemp, 
       and cienaCesModuleSensorHighTemp."
	::= { cienaCesModuleMIBNotifications 9 }

 cienaCesModuleSensorLowTempNotification NOTIFICATION-TYPE
	OBJECTS	{  
       			 cienaGlobalSeverity,  
       			 cienaGlobalMacAddress,
    			 cienaCesModuleChassisNotifIndx,
        		 cienaCesModuleShelfNotifIndx,
        		 cienaCesModuleSlotNotifIndx,
       			 cienaCesModuleSensorNotifIndx,
	             cienaCesModuleSensorDescription,
    	         cienaCesModuleSensorCurrentTemp,
        	     cienaCesModuleSensorLowTempThreshold                  
 	        }
	STATUS	current
	DESCRIPTION
		"This notification is sent when the cienaCesModuleSensor falls below the low
		 temperature threshold for the module.
       To enable the device to send this notification:
        - cienaCesModuleAllModulesTrapState needs to be set to enabled. 
        - cienaCesModuleSensorTrapState needs to be set to enabled.   
       The above values are set to enabled by default. Variable bindings include: 
       cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, 
       cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSensorNotifIndx, 
       cienaCesModuleSensorDescription, cienaCesModuleSensorCurrentTemp, and 
       cienaCesModuleSensorLowTempThreshold."
	::= { cienaCesModuleMIBNotifications 8 }

 cienaCesModuleHASwitchOverNotification NOTIFICATION-TYPE
 OBJECTS { 
     			 cienaGlobalSeverity,  
     			 cienaGlobalMacAddress,
    			 cienaCesModuleChassisNotifIndx,
        		 cienaCesModuleShelfNotifIndx,
        		 cienaCesModuleSlotNotifIndx,
 				 cienaCesModuleSwitchOverReason,  
 				 cienaCesModuleAdminState,
                 cienaCesModuleOperState
		}	   
 	STATUS	current
	DESCRIPTION
		"This notification is sent for CTM switchover.
       To enable the device to send this notification:
        - cienaCesModuleAllModulesTrapState needs to be set to enabled. 
        - cienaCesModuleHATrapState needs to be set to enabled.   
       The above values are set to enabled by default. Variable bindings include: 
       cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, 
       cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, 
       cienaCesModuleSwitchOverReason, cienaCesModuleAdminState, 
       and cienaCesModuleOperState."
	::= { cienaCesModuleMIBNotifications 10 }

cienaCesModuleProtectionModeColdNotification NOTIFICATION-TYPE
 OBJECTS {      
       			 cienaGlobalSeverity,  
       			 cienaGlobalMacAddress,
	             cienaCesModuleSystemProtectionMode   
         }
    STATUS	current
	DESCRIPTION
		"This notification is sent when the protection mode of the system changes to cold. 
		A COLD protection level is the lowest level of protection.  It implies that the secondary CTM is ready to assume the 
		function of the primary CTM but a failure causing a failover would be service impacting.  The secondary CTM has been 
		synchronized with the same software package, configuration files, etc such that it will return the same state 
		as the previous primary CTM.  
		The protection state of the primary CTM shall not transition from NONE to PROTECTED until the secondary CTM 
		has completed the synchronization.  In the case of a failure on the primary CTM, the secondary CTM will 
		immediately assume primary status, finish its initialization and reboot the PSLMs.  The primary CTM will 
		reapply the configuration to the PSLMs after they have booted. Any unsaved configuration changes will NOT be lost
		on a failover as configuration changes are propagated to the secondary CTM configuration.
       To enable the device to send this notification:
        - cienaCesModuleAllModulesTrapState needs to be set to enabled. 
        - cienaCesModuleProtectionModeTrapState needs to be set to enabled.   
       The above values are set to enabled by default. Variable bindings include: 
       cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode."
	::= { cienaCesModuleMIBNotifications 11}

cienaCesModuleProtectionModeWarmNotification NOTIFICATION-TYPE
 OBJECTS {      
       			 cienaGlobalSeverity,  
       			 cienaGlobalMacAddress,
	             cienaCesModuleSystemProtectionMode   
         }
    STATUS	current
	DESCRIPTION
		"This notification is sent when the protection mode of the system changes to warm.
		This state is not supported on the 5410 platform.
       To enable the device to send this notification:
        - cienaCesModuleAllModulesTrapState needs to be set to enabled. 
        - cienaCesModuleProtectionModeTrapState needs to be set to enabled.   
       The above values are set to enabled by default. Variable bindings include: 
       cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode."
	::= { cienaCesModuleMIBNotifications 12 }

cienaCesModuleProtectionModeUnprotectedNotification NOTIFICATION-TYPE
 OBJECTS {      
       			 cienaGlobalSeverity,  
       			 cienaGlobalMacAddress,
	             cienaCesModuleSystemProtectionMode   
         }
    STATUS	current
	DESCRIPTION
		"This notification is sent when the protection mode of the system changes to unprotected.
		A protection level of unprotected implies that there is no secondary CTM present in the system or 
		that the current secondary CTM is not in a state to provide any protection.  In the case of the CTM failure, 
		the primary CTM will reboot and subsequently reboot all the PSLMs, causing loss of existing switched traffic patterns.
       To enable the device to send this notification:
        - cienaCesModuleAllModulesTrapState needs to be set to enabled. 
        - cienaCesModuleProtectionModeTrapState needs to be set to enabled.   
       The above values are set to enabled by default. Variable bindings include: 
       cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode."
	::= { cienaCesModuleMIBNotifications 13 }

cienaCesModuleProtectionModeHotNotification NOTIFICATION-TYPE
 OBJECTS {      
       			 cienaGlobalSeverity,  
       			 cienaGlobalMacAddress,
	             cienaCesModuleSystemProtectionMode   
         }
    STATUS	current
	DESCRIPTION
		"This notification is sent when the protection mode of the system changes to hot.
		A HOT protection level is the highest level of protection.  It implies that the secondary CTM is ready to assume the 
		function of the primary CTM and a failure causing a failover would NOT be service impacting.  The secondary CTM has been 
		synchronized with the same software package, configuration files, etc such that it will return the same state 
		as the previous primary CTM.  
		The protection state of the primary CTM shall not transition from NONE to PROTECTED until the secondary CTM 
		has completed the synchronization.  In the case of a failure on the primary CTM, the secondary CTM will 
		immediately assume primary status, finish its initialization and audit the PSLMs.  All current established traffic patterns
		will be maintained with a minimal loss of traffic.  Any unsaved configuration changes will NOT be lost
		on a failover as configuration changes are propagated to the secondary CTM configuration.
       To enable the device to send this notification:
        - cienaCesModuleAllModulesTrapState needs to be set to enabled. 
        - cienaCesModuleProtectionModeTrapState needs to be set to enabled.   
       The above values are set to enabled by default. Variable bindings include: 
       cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode."
	::= { cienaCesModuleMIBNotifications 14 }

cienaCesModulePostErrorNotification NOTIFICATION-TYPE
 OBJECTS {        
       			 cienaGlobalSeverity, 
       			 cienaGlobalMacAddress,
       			 cienaCesModuleChassisNotifIndx,
        		 cienaCesModuleShelfNotifIndx,
        		 cienaCesModuleSlotNotifIndx,
	             cienaCesModulePOSTErrorDescription
         }
    STATUS	current
	DESCRIPTION
		"This notification is sent when a module POST error is detected.
       To enable the device to send this notification:
        - cienaCesModuleAllModulesTrapState needs to be set to enabled. 
        - cienaCesModulePOSTErrorTrapState needs to be set to enabled.   
       The above values are set to enabled by default. Variable bindings include: 
       cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, 
       cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, and 
       cienaCesModulePOSTErrorDescription."
	::= { cienaCesModuleMIBNotifications 15 }
 
 cienaCesModuleFastReloadUnsuccessfulNotification NOTIFICATION-TYPE
 OBJECTS { 
     			 cienaGlobalSeverity,  
     			 cienaGlobalMacAddress,
    			 cienaCesModuleChassisNotifIndx,
        		 cienaCesModuleShelfNotifIndx,
        		 cienaCesModuleSlotNotifIndx,
 				 cienaCesModuleAdminState,
                 cienaCesModuleOperState
		}	   
 	STATUS	current
	DESCRIPTION
		"This notification is sent when the deprov (cold switchover or failover) fails.
       To enable the device to send this notification:
        - cienaCesModuleAllModulesTrapState needs to be set to enabled. 
        - cienaCesModuleHATrapState needs to be set to enabled.   
       The above values are set to enabled by default. Variable bindings include: 
       cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, 
       cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, 
       cienaCesModuleAdminState, and cienaCesModuleOperState."
	::= { cienaCesModuleMIBNotifications 16 }
 
  cienaCesModuleHitlessModeUnsuccessfulNotification NOTIFICATION-TYPE
 OBJECTS { 
     			 cienaGlobalSeverity,  
     			 cienaGlobalMacAddress,
    			 cienaCesModuleChassisNotifIndx,
        		 cienaCesModuleShelfNotifIndx,
        		 cienaCesModuleSlotNotifIndx,
 				 cienaCesModuleAdminState,
                 cienaCesModuleOperState
		}	   
 	STATUS	current
	DESCRIPTION
		"This notification is sent when the audit (hot failover or switchover) fails.
       To enable the device to send this notification:
        - cienaCesModuleAllModulesTrapState needs to be set to enabled. 
        - cienaCesModuleHATrapState needs to be set to enabled.   
       The above values are set to enabled by default. Variable bindings include: 
       cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, 
       cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, 
       cienaCesModuleAdminState, and cienaCesModuleOperState."
	::= { cienaCesModuleMIBNotifications 17 }
  
    cienaCesModuleSwitchFabricDisruptedUnrecoverableNotification NOTIFICATION-TYPE
 OBJECTS { 
     			 cienaGlobalSeverity,  
     			 cienaGlobalMacAddress,
    			 cienaCesModuleChassisNotifIndx,
        		 cienaCesModuleShelfNotifIndx,
       		     cienaCesModuleSlotNotifIndx
		}	   
	STATUS	current
	DESCRIPTION
		"This notification is sent when the switch fabric detects a game-over failure and the system
		 cannot automatically correct without resetting certain fabric subsystems. This kind of a 
		 disruption can cause a major service interruption.  
		 To enable the device to send this notification:
		 - cienaCesModuleAllModulesTrapState needs to be set to enabled
         - cienaCesModuleSwitchFabricDisruptedTrapState needs to be set to enabled.   
        The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, 
        cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, 
        and cienaCesModuleSlotNotifIndx."
	::= { cienaCesModuleMIBNotifications 18 }

      cienaCesModuleSwitchFabricDisruptedRecoverableNotification NOTIFICATION-TYPE
 OBJECTS { 
     			 cienaGlobalSeverity,  
     			 cienaGlobalMacAddress,
    			 cienaCesModuleChassisNotifIndx,
        		 cienaCesModuleShelfNotifIndx,
       		     cienaCesModuleSlotNotifIndx
		}	   
	STATUS	current
	DESCRIPTION
		"This notification is sent when the switch fabric detects game-over failure and the system
         can automatically correct it. 
  	    To enable the device to send this notification:  
  	    - cienaCesModuleAllModulesTrapState needs to be set to enabled
        - cienaCesModuleSwitchFabricDisruptedTrapState needs to be set to enabled.   
       The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, 
       cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, 
       and cienaCesModuleSlotNotifIndx."
	::= { cienaCesModuleMIBNotifications 19 }

 --
 --Conformance statements
 --
 
  moduleConfigGroup    OBJECT-GROUP
       OBJECTS { cienaCesModuleModel,
       			 cienaCesModuleType,
       			 cienaCesModuleDescription, 
                 cienaCesModuleAdminState, 
                 cienaCesModuleOperState, 
                 cienaCesModuleProtectionRole,
                 cienaCesModuleStandbyStatus,
                 cienaCesModuleLastRebootReason,
                 cienaCesModuleAdminPostState,
                 cienaCesModuleOperPostState }
       STATUS  current
       DESCRIPTION
               "A collection of objects providing information
                about configuration table."
       ::= { cienaCesModuleMIBGroups 1 }


 moduleDescriptionGroup    OBJECT-GROUP
       OBJECTS { 	cienaCesModuleDescriptionBoardName, 
       			 	cienaCesModuleDescriptionBoardDesc, 
                	cienaCesModuleDescriptionTotalNumPorts,
                	cienaCesModuleDescriptionHwVersion, 
                	cienaCesModuleDescriptionMfgDate,
                	cienaCesModuleDescriptionBaseMac, 
                	cienaCesModuleDescriptionBoardSerialNum,
                	cienaCesModuleDescriptionBoardPartNum,  
                	cienaCesModuleDescriptionUpTime}
       STATUS  current
       DESCRIPTION
               "A collection of objects providing information
                about module capabilities."
       ::= { cienaCesModuleMIBGroups 2 } 
       
 moduleSensorGroup    OBJECT-GROUP
       OBJECTS { cienaCesModuleSensorDescription,
       			 cienaCesModuleSensorCurrentTemp,
                 cienaCesModuleSensorHighTemp,
                 cienaCesModuleSensorLowTemp, 
                 cienaCesModuleSensorHighTempThreshold,
                 cienaCesModuleSensorLowTempThreshold}
       STATUS  current
       DESCRIPTION
               "A collection of objects providing information of module temperature sensors."
       ::= { cienaCesModuleMIBGroups 3 }
       
 moduleNotifGroup    NOTIFICATION-GROUP
       NOTIFICATIONS { 	cienaCesModuleStateChangeNotification,
						cienaCesModuleHealthStatusUnknownNotification,
						cienaCesModuleHealthStatusWarningNotification,
						cienaCesModuleHealthStatusFaultedNotification,
						cienaCesModuleHealthStatusDegradedNotification,
						cienaCesModuleHealthStatusGoodNotification,
						cienaCesModuleSensorHighTempNotification,
						cienaCesModuleSensorNormalTempNotification,
						cienaCesModuleSensorLowTempNotification,
						cienaCesModuleHASwitchOverNotification,
						cienaCesModuleProtectionModeColdNotification,
						cienaCesModuleProtectionModeWarmNotification,
						cienaCesModuleProtectionModeUnprotectedNotification,
						cienaCesModuleProtectionModeHotNotification,
						cienaCesModulePostErrorNotification,
						cienaCesModuleFastReloadUnsuccessfulNotification,
						cienaCesModuleHitlessModeUnsuccessfulNotification,
						cienaCesModuleSwitchFabricDisruptedUnrecoverableNotification,
				        cienaCesModuleSwitchFabricDisruptedRecoverableNotification
				}
       STATUS  current
       DESCRIPTION
               "A collection of objects providing information
               about module notifications."
       ::= { cienaCesModuleMIBGroups 4 }

  modulePostErrorGroup    OBJECT-GROUP
       OBJECTS { cienaCesModulePOSTErrorDescription,
       			 cienaCesModulePOSTErrorSeverity,
                 cienaCesModulePOSTErrorScope,
                 cienaCesModulePOSTScopeIndex }
       STATUS  current
       DESCRIPTION
               "A collection of objects providing information of module POST errors."
       ::= { cienaCesModuleMIBGroups 5 }

 END  
 
